Hitachi DH 18DPA Service Manual page 11

(4) Put the LED, main PCB ass'y, and stator FET PCB ass'y in housing (A) in this order.
Fig. 14
(5) Mount the battery terminal to housing (A). Put the red and black internal wires between the stator FET
PCB ass'y and battery terminal in housing (A). Then, put the cable sleeve sheathed internal wire between
the main PCB ass'y and battery terminal in housing (A).
Fig. 15
Cable sleeve
Red and black internal wires
Battery terminal
Model DH 18DPA
Stator FET PCB ass'y
Main PCB ass'y
Stator FET PCB ass'y
Cable sleeve
Red and black internal wires
Battery terminal
Model DH 12DD
-10-
LED
Main PCB ass'y
Stator FET PCB ass'y
Main PCB ass'y