Reference to external
appliances
A reference to external hardware
appears.
Confirm with the
Connect the XCI box or XCI-AD
accessory unit before using the
appliance for the first time.
Alternatively, slide a communication
module into the slot on the back of the
tumble dryer. The dryer must be
disconnected from the power supply
for this process. Then start the
commissioning process.
Setting the display brightness
You will be asked to set the brightness
of the display.
Display brightness
Darker
Touch the segment bar until you
reach the required level of brightness.
The selected brightness level will be
highlighted in orange.
Confirm with
OK
The display will change to the next
setting.
OK
sensor.
Brighter
.
Using for the first time
Setting the date
Date
21
22
23
24
25
Place your finger on the number to be
changed and move your finger in the
desired direction.
When all values have been set,
confirm with the
The display will change to the next
setting.
OK
May
June
July
August
September
sensor.
OK
2023
2022
2021
2020
2019
OK
27