Related Manuals for Sealey TIG150T
Summary of Contents for Sealey TIG150T
- Page 1 INSTRUCTIONS FOR: TIG/MMA INVERTER WELDER 150Amp 230V TIG150T MODEL No: Original Language Version TIG150T Issue: 1 - 11/11/11...
-
Page 2: Safety Instructions
150Amp 230V MODEL No: TIG150T Thank you for purchasing a Sealey Welder. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: BEFORE USING THIS PRODUCT, PLEASE READ THE INSTRUCTIONS CAREFULLY. MAKE CAREFUL NOTE OF SAFETY INSTRUCTIONS, WARNINGS AND CAUTIONS. - Page 3 Control logic for welding machine operation: determines the dynamic response of the current while the electrode melts (instantaneous short circuits) and supervises the safety system fig 1 Control panel for setting parameters and operating modes. Welding machine cooling fan. Original Language Version TIG150T Issue: 1 - 11/11/11...
- Page 4 (3) and tighten the large grub screw until the cable is firmly held. Now slide the outer plug cover up the cable and press the brass body into it as shown in fig.4. Fig 5 Fig 4 Original Language Version TIG150T Issue: 1 - 11/11/11...
-
Page 5: Electromagnetic Compatibility
This shielding should be connected to the welding power source so that good electrical contact is maintained between the conduit and the welding power source enclosure. Original Language Version TIG150T Issue: 1 - 11/11/11... - Page 6 MMA WELDING PROCEDURE The TIG150T will also perform ordinary MMA welding (without gas) using coated electrodes.(Requires optional ARC Accessory Kit INVMMA1) Please note that the way the welding cables are connected to the inverter for ordinary MMA welding may be different to the way the cables are connected for standard TIG welding.
-
Page 7: Maintenance
9.1.4 In the event of any problems of unsatisfactory weld performance please first go through the trouble shooting procedure shown below. If this does not solve the problem the Inverter must be taken to a qualified and authorised service agent for repair. Contact your local Sealey dealer for service.