Service Menu - Miller Big Blue 800 X Duo Air Pak Owner's Manual

6-5. Service Menu

Menu Item
HOT STRT
(Only accessible in SMAW
processes)
DIG RNGE
AUTO CRTR
(Only accessible in GTAW
processes)
VRD*
SOFT WARE
FACT RSET*
*On Side A, user must first select whether to apply settings to Side A only or to both sides.
OM-282374 Page 42
.
Complete Parts List available at www.MillerWelds.com
Selectable Item
Option(s)
LIMT OFF Disables Hot Start option.
LIMT 1.25 Sets Hot Start current limit, selectable between 1.25 and 2.0 (0.25 increments) in
SMAW XX10 and SMAW Remote.
LIMT 1.50 Sets Hot Start current limit, selectable between 1.5 and 3.0 (0.5 increments) in
SMAW XX18.
50 - 150 Sets current limit above preset amperage between 50 and 150 amps.
ATCR ON Enables Auto Crater option.
ATCR OFF Disables Auto Crater option.
VRD ON Enables VRD (Voltage Reducing Device) option, lowering open-circuit voltage.
VRD OFF Disables VRD (Voltage Reducing Device) option.
− − Displays the current revision of firmware installed.
RSET YES Resets all settings to factory defaults.
RSET NO All settings remain at previous settings.
1
Press and hold control for 5 seconds,
then release to access the Service
Menu. Rotate the knob to scroll
through the menu items. Press and
release the control to access the op-
tions and information within each
1
menu item.
Rotate the control counterclockwise
to decrease the value or select NO/
OFF. Rotate the control clockwise to
increase the value or select YES/
ON.
Press and release control to save se-
lection. After 5 seconds of inactivity,
the menu will time out and the selec-
tion will not be saved.
Description
Adjust Control/Select Button
277078