Installing Screen Fonts - Epson EPL-N1600 Setup Manual

Installing Screen Fonts

Follow these steps to install the screen fonts:
1. Make sure Windows is running and the printer is turned off.
2. Insert the CD-ROM that comes with your printer into your
CD-ROM drive D (or E)
3. If you are using Windows 3.1, Windows 3.11 for Workgroups
or Windows NT 3.51, make sure the Program Manager
windows is open; then choose Run on the File menu. If you
are using Windows 95, 98, and NT 4.0, click Start, then choose
Run.
4. Type D:\EPSETUP (or E:\EPSETUP); then click OK.
5. [Excluding Windows NT 3.51 users]: In the dialog box that
appears, double-click Install Font Manager; or you can
install by selecting Install Font Manager and then clicking
the arrrow at the top right.
[For Windows NT 3.51 users only]: In the dialog box that
appears, double-click Install Screen Fonts; or you can install
by selecting Install Screen Fonts and then clicking the arrow
at the top right.
6. Follow the on-screen instructions.
7. When installation is complete, click OK.
The screen fonts are now installed on your computer.
32