Switching Between Continuous Paper and Single Sheets
CAUTION:
continuous paper is still loaded, the printer beeps and the
READY
release lever and press the
the same time to reverse the paper to the paper-park
position. You can then lower the lever again.
3. The printer is ready to print. When it receives data, it
automatically loads a single sheet from the paper cassette and
begins to print.
Switching to continuous paper
To switch from single sheets back to continuous paper, follow these
steps:
1. If a single sheet is in the paper path, press the
to eject it.
2. Raise the paper-release lever to the push-tractor position.
3. The printer is ready. When the printer receives data, it loads
continuous paper from the push tractor automatically and
begins to print.
Paper Handling
2-14
If you lower the paper-release lever while
light goes off. If this happens, raise the paper-
FORM FEED
and
FORM FEED
FONT
buttons at
button