Plugging In The Printer; Running The Self Test - Epson ActionPrinter 3250 User Manual

Plugging in the Printer

1. Make sure the power switch on the printer is turned off. It is off
when the
2. Check the label on the back of the printer to make sure the
voltage required by the printer matches that of your electrical
outlet.
CAUTION:
not match, contact your dealer for assistance. Do not plug
in the power cord.
3. If the power cord is not attached to the printer, connect it to the
AC inlet on the printer.
4. Plug the power cord into a properly grounded electrical outlet.

Running the Self Test

You can run the self test with either continuous paper or single
sheets; this section describes the easier way, with single sheets.
Setting Up the Printer
1-8
side of the switch is pressed down.
If the rated voltage and your outlet voltage do