Related Manuals for MASSEY FERGUSON BETA 7360
Summary of Contents for MASSEY FERGUSON BETA 7360
- Page 1 7360 from serial no. 553900001 7360 PL from serial no. 554000013 7370 from serial no. 564000001 7370 PL from serial no. 564100007 ORIGINAL OPERATOR'S MANUAL...
- Page 2 TABLE OF CONTENTS General Information Operation Controls and Instruments Field Operations Lubrication and Maintenance Adjustments Systems Troubleshooting Off-Season Storage 10. Optional Equipment 11. Technical Specifications 12. Alphabetical Index Find manuals at http://best-manuals.com/search?&s=MF-LA327316011...
- Page 3 CONTENTS Section-page 1. GENERAL INFORMATION Customer information ............1-1 Appropriate use .
- Page 4 CONTENTS Section-page 5. LUBRICATION AND MAINTENANCE General information ............. 5-1 Preliminary Service Inspection .
- Page 5 1. GENERAL INFORMATION 1.1 CUSTOMER INFORMATION NOTE: INTRODUCTION • This combine has been designed and built in Your new self-propelled combine is manufactured compliance with Machine Directive for harvesting seed and cereal crops, for threshing, 2006/42/EC. separating, cleaning and conveying the grain into An EC Declaration of Conformity is supplied the tank and depositing the straw on the ground.
- Page 6 GENERAL INFORMATION OPTIONAL EQUIPMENT WARRANTY Your combine is warranted in compliance with the Your machine was designed to operate in a wide regulations in force in your country and the variety of crops and conditions. However, in certain agreements made with your Dealer. cases it may be necessary to fit additional accessories to improve machine performance or adapt the machine to harvesting special crops.
- Page 7 GENERAL INFORMATION 1.2 APPROPRIATE USE 7300 series combines are designed as self-propelled units with a diesel engine. The machines are manufactured exclusively for usual agricultural purposes, i.e. for harvesting cereal, seed, rice, maize, soya, etc. by cutting or picking-up the crop, threshing and separating the grains from the ears, delivering the grains in the grain tank and unloading them into the grain wagon.
- Page 8 GENERAL INFORMATION 1.3 COMBINE IDENTIFICATION The combine and its main components are identified by serial numbers and/or production codes. The position of the different identification data is described below. NOTE: Always quote the combine serial number when contacting your Dealer for spare parts or assistance.
- Page 9 GENERAL INFORMATION Combine identification Fig. 4 Combine type and serial number appear on the plate and are also punched into the rear right-hand side of the frame (1). Engine Identification Fig.
- Page 10 GENERAL INFORMATION Cab identification Fig. 7 The type plate is located on the outside of the cab, in the bottom left-hand corner. Fig. 7 Hydrostatic pump identification Fig. 8 Identification of the hydrostatic pump is facilitated by means of a plate located on the pump body front part.
- Page 11 GENERAL INFORMATION Straw chopper identification (if fitted) Fig. 10 The straw chopper type plate is located on the right-hand side next to the rotor support. Fig. 10 Chaff spreader identification (if fitted) Fig. 11 The type plate is located on the right-hand side next to the chaff spreader adjustment lever.
- Page 12 GENERAL INFORMATION Please enter the identification details of your combine for convenient reference: Combine model ............... Combine serial number .
- Page 13 GENERAL INFORMATION 1.4 ECOLOGY: INFORMATION FOR THE PREVENTION OF ENVIRONMENTAL POLLUTION Soil, air and water are essential to agriculture and to 4.) Whenever possible, use biodegradable oil for lubricating the chains, as this oil cannot be all life on earth. PROTECT THEM. In areas where collected....
- Page 14 GENERAL INFORMATION 1.5 SAFETY Accidents can be prevented with your help. WARNING SYMBOLS SAFETY INSTRUCTIONS Personal Safety All accident prevention depends on the full Three types of warning signs appear in this manual co-operation of the persons using or involved with and on the decals applied to the machine CAUTION”, “WARNING”...
- Page 15 GENERAL INFORMATION SAFETY PRECAUTIONS 4.) For safety reasons, the two brake pedals must latched order pressed Most agricultural accidents can be avoided by simultaneously when travelling on roads. To observing simple safety rules. hold the machine on inclined ground, the handbrake must be used (the braking effect of ROAD TRANSPORT the hydrostatic drive alone is not sufficient).
- Page 16 GENERAL INFORMATION 7.) On the left-hand side of the operator seat there is an additional seat that can be used by a trainee during harvest. No other persons are allowed on the machine. CAUTION: This seat is not intended for ¥...
- Page 17 GENERAL INFORMATION FIELD OPERATIONS • If the ground is not sufficiently firm or features sudden surface changes, or the tyres do not have enough grip on the DANGER:To provide a better view, certain ground ¥ illustrations in this manual show the machine with the safety guards or covers removed....
- Page 18 GENERAL INFORMATION 8.) Keep a fire extinguisher within easy reach. Check the extinguisher at the intervals prescribed by national law. Replace or recharge it whenever it has been used, even if only partially. The type of extinguisher approved for Europe contains 6 kg of extinguishing agent and belongs to fire class ABC....
- Page 19 GENERAL INFORMATION MAINTENANCE WORK Work on the Machine 1.) Before inspecting, cleaning, adjusting or servicing combine and table (grain or maize), always ensure that the engine is stopped, the brakes are applied and all moving parts have come to a complete stop. WARNING: Wear protective...
- Page 20 GENERAL INFORMATION 9.) When carrying out welding on the machine, 12.) Before starting the engine, make sure no one is heat and welding splatters may cause serious carrying out service or inspection on the damage. If possible, have this work carried out machine or standing in the combine operating by skilled staff.
- Page 21 GENERAL INFORMATION DANGER: Risk of getting trapped. Engine ¥ 1.) Never start the engine if battery recharging 17.) Never work on the machine wearing loose equipment is connected to the machine. clothing that could get caught in a moving part. Check that all rotating parts are protected with safety guards.
- Page 22 GENERAL INFORMATION 4.) Wear hearing protectors (ear muffs or plugs) if 6.) The coolant (antifreeze) contains exposed to irritating noise. monoethylene glycol and other chemicals which are toxic if ingested; prolonged contact with the skin should also be avoided. When working with antifreeze, take the following precautions: •...
- Page 23 GENERAL INFORMATION DIESEL OIL Required quality The quality of diesel oil used is the most important DANGER: Risk of explosion. ¥ factor in allowing the engine to offer the 1.) Petrol, alcohol or mixtures of combustible oils performance specified regards fume or fuels should under no circumstances be added to the diesel oil.
- Page 24 GENERAL INFORMATION BATTERY Battery disposal Batteries contain substances that may be harmful DANGER:The battery contains ¥ electrolytic solution with sulphuric acid, to human health or the environment when not which may cause burns and produce serious explosions. Avoid contact with handled correctly.
- Page 25 GENERAL INFORMATION Special remarks for 7360 PL and 7370 PL 8.) Couple the brake pedals to prevent braking errors. models under levelling system Keep the braking system perfectly efficient. conditions Check the oil level in the tank frequently and replace the friction pads before they are completely worn.
- Page 26 GENERAL INFORMATION SAFETY DECALS Using this manual as a guide, look over the machine and note the position and the meaning of each safety decal. Safety decals are positioned on the machine as illustrated below. Review the safety decals with the machine operators, along with the operating instructions of this manual.
- Page 27 Decal position - right-hand side...
- Page 28 Decal position - left-hand side...
- Page 29 Decal position - rear...
- Page 30 GENERAL INFORMATION DESCRIPTION OF DECALS 4375771M1 4375789M1 4375825M1 Decal 1 Decal 2 Decal 3 Read this Operator's Manual Do not climb onto or ride on the Do not open or remove the safety carefully before operating the platform or the ladder when the guards when the engine is machine.
- Page 31 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...
Need help?
Do you have a question about the BETA 7360 and is the answer not in the manual?
Questions and answers