Reversible Lever Handles - TRU-BOLT M1740024 Manual

REVERSIBLE LEVER HANDLES

11. REMOVING AND REVERSING LEVER HANDLES
a. Make sure the Door Lock is in the unlocked position and then release catch by
inserting Lock Stick into the slot on the underside of levers (Figure 11a).
b. Remove both lever handles from the bases by pulling away from door when the catch
is released (Figure 11b).
c. Switch the lever handles to the opposite side (Figure 11c).
Figure 11a-c
12. REPLACING LEVER HANDLES
a. Make sure lock cylinder is in line with handle (Figure 12a).
b. Replace handles by sliding onto the bases until the catch pins are engaged.
(Figure 12b).
Figure 12a
Lock Stick
Reversible handle
Interchangeable
Cylinder
Lock Stick
Figure 12b
Page 6