Sharp SWD-78EHL-SL Service Manual page 21

How to change parts
page 24
22.2 Pull off the wire connector from the driver board.
22.3 Open the top cover.
22.4. Pull off the silicone tube on the ozonator.
22.5 Unscew 2 bolts for the ozonator and change a new one.
22.6 Connect the silicone tube and wire back.
22.7 Install the top cover and control box cover.
23. How to Connect / disconnect the quick connector and tubes
23.1 Take out the fork。
23.2 Press down the collet then pull the tube out。
23.3 Cut a chamfer by pencil sharpener at the end of the PE tube before