NEC Express5800/R320g-M4 Maintenance Manual page 65

Chapter 1 Maintenance
(2)
Error messages on a virtual LCD
You can confirm the error messages by using EXPRESSSCOPE Engine 3 web browser window. For details,
see Chapter 3 (3. EXPRESSSCOPE Engine 3) in User's Guide.
The table below shows the error messages displayed on upper and lower lines, cause, and action.
If the same error appears even if the action is performed, contact your sales representative.
Messages displayed on an upper LCD line
Message on
Upper LCD Line
XXXX BIOSXXXX
POST Completed
Successfully
POST ERROR
XXXX
System Simplex
System Duplex
CPU Broken
IO Broken
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
Description
Displayed while POST is running.
Displayed when POST completes normally.
Error XXXX was detected during POST.
The system is operating in simplex mode.
CPU/IO module is operating in duplex
mode.
A CPU failure was detected.
An I/O unit failure was detected.
Message displayed on
upper LCD line
Message displayed on
lower LCD line
Action
This is not an error.
This is not an error.
Check the message displayed on LCD, and take an
appropriate action.
This is not an error.
This is not an error.
Contact your sales representative.
Contact your sales representative.
6. Error Messages
65