Table of Contents
Advertisement
Quick Links
GUILD
10.8V Lithium-Ion Drill Driver
Instruction Manual
Important
- Please read these instructions fully before operating or maintaining your Guild cordless drill driver
These instructions contain important information that will help you get the best from your Guild
cordless drill driver, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989
After Sales Support
UK/Ireland 0333 3201989
Help@guildpowertools.co.uk
CDT212G
Advertisement
Table of Contents
Related Manuals for Guild CDT212G
Summary of Contents for Guild CDT212G
- Page 1 Help@guildpowertools.co.uk Important - Please read these instructions fully before operating or maintaining your Guild cordless drill driver These instructions contain important information that will help you get the best from your Guild cordless drill driver, ensuring it remains safe to operate.
-
Page 2: Table Of Contents
Contents Safety Information.....................3 In The Box........................9 Accessories........................9 Operating Instructions....................10 Trouble Shooting......................14 Maintenance......................14 Technical Data......................15 Environmental Protection..................16 Guarantee........................17 Customer Helpline 0333 3201989... -
Page 3: Safety Information
Safety Information Important - Please read these instructions fully before starting assembly Warning Symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the cordless drill driver. To reduce the risk of injury, Please read the instruction manual Warning Wear ear protection... - Page 4 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
- Page 5 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach.
- Page 6 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
- Page 7 Safety Information Important - Please read these instructions fully before starting assembly Safety Warnings For Battery Pack than that specifically provided for use with the equipment. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Page 8 4°C, or above 40°C. This is important as it can prevent serious damage to the battery pack. 18. Charge only battery pack of the same model provided by GUILD and of models recommended by GUILD Customer Helpline 0333 3201989...
-
Page 9: In The Box
In The Box Parts Keyless chuck Battery pack release button Torque adjustment ring Battery pack Two-speed gear control On/off switch Forward/Reverse rotation control LED light Soft grip handle Accessories Double Ended Bit (SL5.5/PH2) Battery Pack (1.3 Ah Li-ion) Charger (3-5 hr) Customer Helpline 0333 3201989... -
Page 10: Operating Instructions
Operating Instructions NOTE: Before using the tool, read the instruction book carefully. INTENDED USE This tool is intended for driving in and loosening screws as well as for drilling in wood, metal and plastic. BEFORE PUTTING INTO OPERATION 1. RECHARGING BATTERIES A) CHARGING THE BATTERY The battery charger supplied is matched to the Li-ion battery installed in the tool. - Page 11 Operating Instructions 2. REMOVE OR INSERT BATTERY PACK (SEE FIG B) Press the battery pack release button and remove the battery pack from the tool. After recharge slide the battery pack into tool’s battery port. A simple push and slight pressure will be sufficient.
- Page 12 Operating Instructions Gear I Low speed range: for screwdriving or working with large drilling diameter Gear II High speed range: for working with small drilling diameter WARNING: To prevent gear damage, always allow the chuck to come to a complete stop before changing the direction of rotation or the two-speed gear control.
- Page 13 Operating Instructions 7. USING THE LED LIGHT The sight light allows you to keep a clear view under less illuminated circumstances. To turn on the light simply press the on/off switch. When you release the on/off switch, the light will be off. 8.
-
Page 14: Trouble Shooting
Trouble Shooting 1. WHY DOES THE DRILL NOT TURN ON WHEN YOU PRESS THE SWITCH? The forward/reverse rotation control, which is on top of the trigger, is positioned in the lock function. Unlock the forward/reverse rotation control by putting it into the required rotation position. -
Page 15: Technical Data
Technical Data Technical Data Table Voltage 10.8V No load speed 0-400 / 0-1400 /min Number of clutch positions 18+1 Max torque 15Nm Chuck capacity 10mm Charging time 3-5hr Charger Input 100-240V~50/60Hz Charger Output 0.27A Steel Max. drilling capacity Wood 20mm Machine weight 1.00kg Noise Information... -
Page 16: Environmental Protection
Technical Data Vibration Information This tool may cause hand-arm vibration syndrome if its use is not adequately managed. WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also take account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle but not actually doing the job. -
Page 17: Guarantee
Guarantee This product is selected for DOMESTIC USE ONLY and not for business use. This product is guaranteed against manufacturing defects for a period of 24 months. This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifications or alterations, or has been the subject of commercial use.
Need help?
Do you have a question about the CDT212G and is the answer not in the manual?
Questions and answers