Enable Partymode; Disable Partymode; Enable Partymode Secure Or 1-Key Mode; Disable Partymode Secure Or 1-Key Mode - Ghost Controls AXWK Manual

ENABLE PARTYMODE:

When Partymode is enabled the gate will stay open and autoclose (if enabled) is suspended. The gate opener will BEEP TWICE
if attempting to close the gate while PartyMode is enabled.
1. Press and Release PARTY BUTTON
2. Enter your PRIMARY PIN
3. Press SEND

DISABLE PARTYMODE:

When Partymode is disabled the gate will BEEP THREE (3) TIMES to indicate that it is exiting PartyMode.
1. Press and Release PARTY BUTTON
2. Enter your PRIMARY PIN
3. Press SEND
NOTE: IF THE ABOVE DOES NOT DISABLE PARTYMODE TURN THE GATE OPENER OFF AT CONTROL BOX AND
THEN BACK ON AND THIS WILL EXIT PARTYMODE.

ENABLE PARTYMODE SECURE OR 1-KEY MODE:

allows guest to enter your property while keeping it secure because the gate shuts after each guest when autoclose
is set) The PartyMode Secure button will stay lit for a few seconds letting you know PartyMode Secure is enabled.
This mode is useful when a guest is not required to use a PIN to operate the gate such as when it is installed on the inside of the
property for guests to exit property.
1. Press and Release 1-KEY BUTTON
2. Enter your PRIMARY PIN
3. Press SEND

DISABLE PARTYMODE SECURE OR 1-KEY MODE:

When Partymode Secure is disabled the gate will go back its normal programmed autoclose gate setting.
1. Press and Release 1-KEY BUTTON
2. Enter your PRIMARY PIN
3. Press SEND
(this holds your gate open)
We recommend that the Autoclose feature on the gate opener is enabled when using this feature.
(Pressing any # key on the keypad
1
1
© G h o s t C o n t r o l s 2 0 2 1
7