Related Manuals for Matrix Appliances MS100
Summary of Contents for Matrix Appliances MS100
- Page 1 Manual for installation, use and maintenance MS100 Single Oven year parts 1 year labour guarantee www.matrixappliances.co.uk...
- Page 2 Important The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance or use in a commercial environment.
- Page 3 Parts intended to come into contact with food conform to 1935/2004/ IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EU DIRECTIVE 2012/19/EU. At the end of its working life, the product must be taken to a special local authority waste collection centre or to a dealer providing appliance recycling services.
-
Page 4: Before First Use
• Do not grill food containing fat without using the grill pan grid. • Do not cover the grill pan grid or the oven walls with aluminium foil. • Do not use the oven tray for roasting. • Do not perform maintenance or cleaning of the oven without first switching off the electricity supply. - Page 5 15 minutes of full grill 30 minutes of fan oven Please note: • This oven has been fitted with a cooling fan to achieve maximum efficiency and to maintain low surface temperatures. The cooling fan will switch on automatically when the oven switches on. It is normal for the cooling fan to run for an hour or more after use, depending on the duration, temperature and type of cooking program used.
-
Page 6: Control Panel
Control Panel fig.1 Control panel: A. Temperature control knob B. Function control knob Oven Controls and Use Temperature knob • To set the temperature, turn the temperature knob clockwise to the required temperature. • Once the oven has reached the required temperature, the temperature indicator lamp on the control panel will switch off. - Page 7 Please note, the oven light will operate on all functions. Defrost Using the fan only this oven function circulates the air around the oven cavity, speeding up the natural defrost process Fan Oven Using the circular element and the fan with a temperature between 50°C and 250°C, this cooking function blows the air into and around the oven cavity.
-
Page 8: Cleaning And Maintenance
For each grill function please note: • Always grill with the oven door closed. • Put the grill pan as close to the grill as possible. • Do not grill for more than 30 minutes at a time. • Preheat the grill for up to five minutes with the oven door closed. Internal shelf positions The shelves and grill pan can be inserted into any one of five different positions. - Page 9 area that has been cleaned using a damp soft cloth or tissue to remove any residual cleaning fluid and then wipe dry with a clean, dry cloth or tissue (such as kitchen towel). Cleaning the oven interior The oven should always be cleaned after use when it has been allowed to cool down.
- Page 10 extended and points towards the door (fig. 2). • Close the door most of the way, lift it slightly and then pull it, safely but firmly, towards you. Replacing the appliance door • Hold the door to the appliance in the closed position and fig.
- Page 11 Removing the inner door glass With the door removed, the inner glass can also be taken out for cleaning purposes. • Use a flathead screwdriver or to unhook the door slat, as shown in fig. 5 • Remove the door slat, as per fig. 6, and place it somewhere safe where it will neither receive nor cause damage.
- Page 12 • removed. There are a number of rubber guides attached to the inner pane and these must be returned to their original positions when reassembling the door. Fig. 7 shows these guides and their position on and around the inner glass. •...
-
Page 13: Changing The Oven Lamp
Changing the oven lamp Important: Before any maintenance is started involving electrical parts, the appliance must be disconnected from the power supply. If the oven has been in use, let the oven cavity and the heating elements cool down before attempting any maintenance. Never use screwdrivers or other utensils to remove the light cover. -
Page 14: Installation
Installation The installation of this appliance must be carried out by a suitably qualified person. If the oven is being installed into a built under oven housing unit ensure that the front rail at the top of the unit is not installed as it could restrict ventilation. - Page 15 How to install your oven You will need the housing area in fig. 10 to fit your oven correctly. The oven is designed to fit into a cabinet of 600mm width. The oven can be built in or built under the kitchen units, but you must ensure that it is properly ventilated.
-
Page 16: Mains Electrical Connection
Mains Electrical connection Warning! This appliance must be earthed. This appliance is intended to be connected to fixed wiring by a double pole switch, having a contact separation of at least 3mm in all poles and protected by a 13a fuse. The switch must be positioned no further than 2m from the appliance. - Page 17 Please note: • The mains cable must only be replaced by a qualified electrician or service engineer and must be of equivalent or better rating (i.e. 3 x 1.5mm ² , HO5VV-F). • This appliance is intended to be connected to the mains supply with a cable of cross sectional area 1.5 mm ²...
-
Page 18: Troubleshooting
Troubleshooting Problem Cause Potential remedy If any of the above steps do not resolve your issue, please contact CDA Customer Care to arrange a repair. Contact details are below. Please have to hand all the details from your appliance’s rating plate which can be found on the back of the oven and/or on the back of the instruction manual/warranty card. -
Page 19: Energy Efficiency Information
Energy Efficiency Information Model c i f MS100 Mass of the i l p Number of i t i Heat source per cavity (electricity or c i r y t i Volume per y t i Energy consumption (electricity) required to... - Page 20 Serviced by For our Customer Care Department, or for Service, please contact us on: The CDA Group Ltd. Harby Road, Langar, Nottinghamshire, NG13 9HY Tel: 01949 862012 Fax: 01949 862003 Email: customer.care@cda.eu...
Need help?
Do you have a question about the MS100 and is the answer not in the manual?
Questions and answers