Related Manuals for Samsung SHN-WDD510
Summary of Contents for Samsung SHN-WDD510
- Page 1 Samsung Smart Door Lock User Guide SHN-WDD510 Please review all included documentation and use the product as intended. Safety precautions must be followed to avoid personal injury or property damage.
-
Page 2: Table Of Contents
��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� Introduction Congratulations on the purchase of your Samsung Smart Door Lock! Your lock has a touch sensitive number display pad and optionally a 13.56MHz Card reader. Up to 100 users can be registered to gain access with unique Codes or Access Cards (supports ISO14443A type). -
Page 3: Installation
Spec: FH+T5x76 Mechanical Keys Batteries User Manual RF Tag Samsung Smart Door Lo ck User Guide SHN-WDD510 Please review all included documentation and use the product as intended. Safety precautions must be followed to avoid personal injury or property damage. -
Page 4: Door Preparation
SHN-WDD510 Smart Door Lock Door Preparation Step 1. Check the Door Status 1) This lock supports door thickness of 1-3/8” to 2-5/32” (35 to 55mm). 2) Using the provided lock template, ensure that there are no obstructions that would prevent installing the lock properly. - Page 5 SHN-WDD510 Smart Door Lock Step 3. Drilling 1) Drill a 2-1/8˝ (54 mm) diameter hole through the door, as indicated on the template, using a hole saw. 2) Drill a 1˝ (25 mm) mortise hole using a hole saw. 3) Drill strike plate holes using a drill bit (1/8˝, 2.5 mm).
-
Page 6: Preparing The Parts
SHN-WDD510 Smart Door Lock Preparing the parts 1. Adjusting the length of the dead bolt Turn the body of the dead bolt to adjust the length of the dead bolt. It can be 60mm (2-3/8”) or 70mm (2-3/4”) 2. Changing the faceplate of the dead bolt Change the faceplate of the dead bolt following the size of a strike hole. -
Page 7: Installing Lock
SHN-WDD510 Smart Door Lock Installing lock Outside Inside 1. Installing the Dead Bolt(E) 1. Before installation 1) Check the faceplate type of your door. 2) Make sure the deabolt directon as shown before inserting it into a door side. 2. Insert the deadbolt from the side of the door. - Page 8 SHN-WDD510 Smart Door Lock 3. Installing the Mounting Plate 1. Detach the Interior Mounting Plate from the interior unit. 2. Fasten the interior mounting plate with three TH+M5x40 (G2) 90% of the way. 3. Align the Exterior Unit with the Interior Mounting Plate and then tighten the screws.
- Page 9 OPTION : Connection for Video Intercom Connect the cable of video intercom to the Dry Contact Signal Interior Unit. SHN-WDD510 receives 1 second of dry contact signal to open the door remotely. It is normally compatible with SHT-3006 and other Samsung Video Intercom systems.
-
Page 10: Setting Of Right-Handed / Left Handed
SHN-WDD510 Smart Door Lock Setting of Right-Handed / Left Handed *All status should be checked while the dead bolt is in OPEN POSITION. Left-handed Right-handed Right-handed Left-handed Tailpiece Thumb turn... -
Page 11: Programming
SHN-WDD510 Smart Door Lock PROGRAMMING Programming Features Exterior Interior Network Module Slot [SET] Button Open/Close Button Touchscreen Magnetic Sensor Card Reader Thumbturn Lever Restart Button [REG] Button Privacy Mode Indicator Emergency Battery Cover Key Hole Low Battery Indicator Symbols Description... - Page 12 SHN-WDD510 Smart Door Lock Symbols Description Symbols Description Touch the Card reader with the Press the [OPEN/CLOSE] OPEN / CLOSE User Card. button. Enter the User Number. Can be set from 1 to 100. Definitions Indicator Lamp : Indicates the operational status when the Card is being read or the lock is in operation.
- Page 13 SHN-WDD510 Smart Door Lock Cards or the lock settings. It is found below the battery cover of the Interior Unit. The length of time the [REG] button is pressed varies depending on the function. Resetting : Deletes all registered information and restores the factory default. After resetting, change the Master PIN Code for security.
-
Page 14: Changing The Master Pin Code
SHN-WDD510 Smart Door Lock Lock Activation Touch the [Touchscreen]. Touch lock with back of hand or fingers to acti- vate. Changing the Master PIN Code Open the battery cover When the touchscreen Press the [ ] button after Enter the new Master... -
Page 15: Managing User Pin Code/ Card
SHN-WDD510 Smart Door Lock Managing User PIN Code/ Card Registering a User PIN Code/ Card Open the battery cover of When the touchscreen is il- Press the button after the Interior Unit and press luminated, enter the current pressing the button. - Page 16 SHN-WDD510 Smart Door Lock Deleting User PIN Code / User Card Open the battery cover of When the touchscreen is il- Press the button after the Interior Unit and press luminated, enter the current pressing the button. [REG] button briefly.
-
Page 17: Register Network Module
SHN-WDD510 Smart Door Lock Managing Network Module Registering Network Module Note: After registering Network Module, Smart doorlock is able to be remotely- controlled via Gateway(optional). 1~100 1~100 Open the battery cov- When the touchscreen Press the [ ] button after... -
Page 18: Basic Lock Operation Overview
SHN-WDD510 Smart Door Lock Basic Lock Operation Overview Opening the Door with a PIN Code → The door opens within one Enter the PIN Code and Touch the [Touchscreen]. second. press the button. Opening the Door with a Card →... -
Page 19: Programming Through Menu Mode Using Master Code
SHN-WDD510 Smart Door Lock Programming Through Menu Mode Using Master Code Program Operation in Master Mode : Master Program Mode Only 1~100 1~100 Delete User PIN / Card 1~100 Registering Network Module Deleting Network Module Note: Maximum number of user registration is 100. (User PIN Codes, User Cards, Key Fobs) -
Page 20: Miscellaneous
SHN-WDD510 Smart Door Lock MISCELLANEOUS Miscellaneous Information Reset to Factory Default Resetting the lock will delete all registered information. Note: All registered Master and user data will be deleted, and the lock will be reset to default settings. Press the [REG] button for 3 seconds. -
Page 21: Troubleshooting
SHN-WDD510 Smart Door Lock Troubleshooting When the lock doesn’t function correctly, please check the items below. If you can’t resolve the problem, please contact the nearest service center. Problem Resolution Reference ● Check if the batteries are inserted in the correct polarity. - Page 22 SHN-WDD510 Smart Door Lock ● Check if Auto Locking is set. When Manual Locking is set, touching the [Touchscreen] locks the door. The door won’t ● If the door doesn’t lock automatically when Auto Locking lock automatically is set, then the lock has been installed incorrectly.
-
Page 23: User Registration Table
SHN-WDD510 Smart Door Lock User Registration Table User No. PIN CODE/CARD User Name User No. PIN CODE/CARD User Name... -
Page 24: Product Specifications
SHN-WDD510 Smart Door Lock Product Specifications Item Specifications Voltage 4 AA Alkaline 1.5V Batteries (LR6) (6V) Operation Method Electronic Control Method (PIN Code entry or Card reading) Weight 1.8Kg (including both inside and Exterior Unit) 69.8 mm (W) x 159.8 mm (H) x 35.2 mm (D) Exterior Unit 2-3/4˝... - Page 25 In no event shall SAMSUNG SDS be liable for an amount in excess of SAMSUNG SDS’s original selling price of the product, for any loss or damage, whether direct, indirect, incidental, consequential, or otherwise arising out of any failure of the product.
- Page 26 SAMSUNG SDS is not an insurer of either the property or safety of the user’s family or employees, and limits its liability for any loss or damage including incidental or consequential damages to SAMSUNG SDS’s original...
-
Page 27: Drilling Template
SHN-WDD510 Smart Door Lock Drilling Template Sheet : 2-3/8″(60mm) Backset 5/32 Deep " Ø2-1/8 " Bore 1 "DIA. Latch Hole. 2-3/8 "... - Page 28 SHN-WDD510 Smart Door Lock...
- Page 29 SHN-WDD510 Smart Door Lock Drilling Template Sheet : 2-3/4″(70mm) Backset Ø2-1/8" 5/32 Deep " Bore 1 "DIA. Latch Hole. 2-3/4"...
- Page 30 SHN-WDD510 Smart Door Lock...
-
Page 31: Tailpiece Setting
SHN-WDD510 Smart Door Lock Tailpiece Setting ��� Tailpiece drawing 1. Check the thickness of your door. 2. According to your door thickness, cut the tailpiece. Note: Cut the tailpiece 5mm longer than the door thickness. Thickness of the door cutting point How to cut 1. - Page 32 Door Lock Product information and customer service contact SAMSUNG SDS SAMSUNG SDS Co.,Ltd., reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials. Copyright © 2014, SAMSUNG SDS Co.,Ltd. All right reserved.