Spares & Accessories; Specifications - Olympus OFP Instructions Manual

7
S
PARES & ACCESSORIES
NOTE
To maintain standards compliance, use only the following Spares and Accessories with this product.
7.1 Spares
Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid container . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid container strap
Irrigation tube (pack of 10)
Filter (pack of 10) . . . . . . . . . . . . . . . . . . . . . . . . . .
Footswitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuse T1A (pack of 5)
Fuse T2A (pack of 5)
Power cable (UK) . . . . . . . . . . . . . . . . . . . . . . . . . .
Power cable (USA)
Power cable (Europe)
Power cable (RoW)
MAJ--855 endoscope tube
7.2 Accessories
Remote control cable MAJ--920
8
S
PECIFICATIONS
Items

Specifications

Product name Olympus Flushing Pump OFP
Standards
compliance
Electro-magnetic
compatibility
Classification Classification
(electromedical
Type of protection
equipment)
against electrical
shock
Degree of protection
against electrical
shock
Degree of protection
against explosion
Mode of operation
FLUSHING PUMP OFP
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
3024005
This product complies with the requirements of EN IEC 60601-1-2 for emissions and
immunity, and as such, its operation is unlikely to be affected by, or cause interference
with, equipment meeting appropriate EMC standards. As a precaution, equipment which
may be sensitive to interference outside the limits specified by EN IEC 60601- - 1- - 2 should
not be placed in close proximity to the OFP.
220-240V model
Classification according to EN IEC 60601-1: Class I Type BF.
110-120V model
Classification according to UL 2601-1: Class I Type BF
In accordance with EN IEC 60601-1 and UL 2601- - 1, the OFP is marked with the
symbol to indicate the provision of an adequate degree of protection against electrical
shock and that it has an applied part isolated from all other parts of the equipment.
None: the Olympus OFP must NOT be used in the zone of risk of flammable anaesthetic
gases.
Continuous
5070135
7501352
7501353
7501669
7501355
7501357
7501356
7501404
7145454
7318766
7145462
7318561
1113054 (UK part number only)
This symbol on the 110--120V version indicates it is listed by
Intertek Testing Services as meeting the requirements of UL
2601--1 and CAN/CSA C22.2 601.1--M90.
12