Table of Contents
Advertisement
Installation Instructions
Choose Your Mounting Location
A good mounting location is important to getting the best performance out of your MR33 access point. Keep the
following in mind:
1. The device should have unobstructed line of sight to most coverage areas. For example, if installing in an office
filled with workspaces divided by mid-height cubicle walls, installing on the ceiling or high on a wall would be ideal.
2. Power over Ethernet supports a maximum cable length of 300 ft (100 m).
3. If being used in a mesh deployment, the MR33 should have line of sight to at least two other Meraki devices. A
Cisco Partner can help ensure that your AP placement is ideal.
Install the MR33
For most mounting scenarios, the MR33 mount cradle provides a quick, simple, and flexible means of mounting your
device. The installation should be done in two steps. First, install the mount cradle to your selected location. Then,
attach the MR33 to the mount cradle.
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MR33 and is the answer not in the manual?
Questions and answers