Table of Contents
Advertisement
How to Use - Heat Level Adjustment
5
Please pay attention to the hot surface after operations
After use, the display of the corresponding cooking zone will flash
"H", indicating that the surface is very hot.
* It will disappear when the surface has cooled down to a safe
temperature.
The settings below are guidelines only. The exact setting will depend on several factors, including
your cookware and the amount you are cooking. Please try to use the appliance to find the settings
suits you the best.
Heat level
Power
consumption
200
(W)
Mode
Notes
When only one cooking zone is used, the heat level can be set up to 9.
●
If the both cooking zones are used simultaneously, the heat levels may be
●
regulated as follows in order to restrict the overall power consumption.
•
The initial heat levels are 5.
•
The heat level for one cooking zone can be set up to 8 and cannot increase.
•
If the heat level of one cooking zone exceeds the limit, the heat level of the other cooking zone
automatically decreases by one.
(For example: if the heat level of one cooking zone is 8, the upper limit of the heat level of the
EN14
Guidelines to adjust heat levels
Low
1
2
3
500
800
Keep warm
other cooking zone is 4 and so on. There are also combinations of 7→5 and
6→6.)
Medium
4
5
1000
1200
1400
Deep-fry•Boil
High
6
7
8
1600
1800
Stir-fry•Cook
9
2000
Advertisement
Table of Contents
