Cleaning The Print Head Using A Computer Utility - Epson L3250 User Manual
Hide thumbs
Also See for L3250:
- Start here (4 pages) ,
- User manual (190 pages) ,
- User manual (190 pages)
Table of Contents
Advertisement
• If almost the entire pattern is missing, see the link below for instructions on performing a Power
Cleaning.
If you don't see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then try cleaning the print head again. If quality still does not improve, run a Power
Cleaning. If there is still no improvement, contact Epson support.
Parent topic:
Related concepts
Power Cleaning
Related references
Where to Get Help
Related tasks
Loading Paper in the Sheet Feeder
Checking the Nozzles Using the Product Buttons
Cleaning the Print Head Using a Computer Utility
You can clean the print head using a utility on your Windows or Mac computer.
1. Make sure no product lights are indicating errors.
2. Load a few sheets of plain paper in the product.
3. Do one of the following:
• Windows: Access the Windows Desktop and right-click the
side of the Windows taskbar, or click the up arrow and right-click
• Mac: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print &
Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select
Utility and select Open Printer Utility.
4. Select Head Cleaning.
Print Head Cleaning
icon for your product in the right
141
.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the L3250 and is the answer not in the manual?
Questions and answers
I dont have the short cut to print or scan I cannot scan
how to scan documents to computer
To scan documents using the Epson L3250, follow these steps:
1. Ensure your printer is connected to your computer.
2. Go to the search bar and type "Epson Scanner."
3. Open the Epson Scanner application.
4. Select "Epson L3250" as the scanner.
5. Choose "Document Mode" if scanning a document.
6. Click "Preview" to see the scanned area.
7. Adjust the scanning area if needed.
8. Click "Scan" and wait for the process to complete.
9. Save the scanned document to your desired location.
The document will be saved automatically based on your selected settings.
This answer is automatically generated
i need to cleaning the head
To clean the print head on an Epson L3250:
1. Print a nozzle check pattern to check for print head issues:
- Press and hold the Stop button.
- Press the Power button until the power light starts flashing.
- Release both buttons and wait for the printout.
2. If there are issues, clean the print head:
- Make sure the printer is turned on.
- Press and hold the Stop button for about 5 seconds until the power button starts blinking.
- Release the button and wait for about 4–5 minutes while the cleaning process runs.
- Do not turn off the printer or open the front cover during cleaning.
3. When the power button stops blinking, print another nozzle check pattern to see if the issue is resolved.
Ensure there is enough ink in the tanks before performing the cleaning.
This answer is automatically generated
принтер подключен.печатает.а сканера пишет.что не видит