Power Button; Reset Button - National Instruments cRIO-9081 User Manual

Buttons
The cRIO-9081 provides the following buttons.
1
2

1. Reset Button

2. Power Button

3. CMOS Reset Button
Power Button
Pressing the POWER button powers the cRIO-9081 on and off. If the cRIO-9081 becomes
unresponsive, you can power it off by holding the POWER button down for 4 seconds.
Reset Button
Pressing the RESET button resets the processor in the same manner as cycling power.
Note
The FPGA continues to run unless you select the Autoload on Any Device
Reset boot option.
CMOS Reset Button
The cRIO-9081 has a CMOS reset button that you can use to reset the CMOS and the BIOS.
LEDs
The cRIO-9081 provides the following LEDs.
POWER LED Indicators
The following table lists the POWER LED indicators.
NI cRIO-9081
POWER
DRIVE
STATUS
USER1
USER FPGA1
NI cRIO-9081 User Manual | © National Instruments | 13
3