Download Print this page

International Door Closers D200 Series Installation Instruction

Download this manual

Patent Pending 15/296,436 & 29/581,313

Concealed Overhead

"Competitor"

Series D200

Center Hung\Double or Single Acting

Side and End Loading

Installation Instruction

East: 1920 Air Lane Drive, Nashville, TN 37210 ■ 615/885-7060

West: 4431 E. La Palma, Anaheim, CA 92807 ■ 714/666-0390

Need help?

Do you have a question about the D200 Series and is the answer not in the manual?

Page 1 “Competitor” Series D200 Center Hung\Double or Single Acting Side and End Loading Installation Instruction COPYRIGHT 2016 INTERNATIONAL DOOR CLOSERS INC East: 1920 Air Lane Drive, Nashville, TN 37210 ■ 615/885-7060 West: 4431 E. La Palma, Anaheim, CA 92807 ■ 714/666-0390...
Page 2 Drill holes for 8-32 x ½ “ Install anchor using Mount door header on anchor using 10-32 x ⅜ ” pan head self-threading 8-32 x ½ “ pan head self-threading screws. flat head self-threading screws as shown. screws/ COPYRIGHT 2016 INTERNATIONAL DOOR CLOSERS INC T-20085...
Page 3 1 ¼” hole for clearance of pivot base on center line 2 ¾ “ from hinge end of threshold. NOTE: when threshold is not used, pivot bearing stud must be shortened by sawing off at score ½” from bottom COPYRIGHT 2016 INTERNATIONAL DOOR CLOSERS INC...
Page 4 ¼ -20 x 1” hex head centering bolts. NOTE: After door is installed, the two ¼-20 x 1” socket head clamp bar cap screws with lock washers must be tightened securely. COPYRIGHT 2016 INTERNATIONAL DOOR CLOSERS INC IN-CC-200-IDC...