RemovingTheBuilt-InRechargeable; Battery; Specifications - Panasonic ER-GS60 Operating Instructions Manual

Removingthebuilt-inrechargeablebattery
Removethebuilt-inrechargeablebatterybeforedisposingof
theclipper.
Please make sure that the battery is disposed of at an officially
designated location if there is one.
This figure must only be used when disposing of the clipper, and
must not be used to repair it. If you dismantle the clipper yourself,
it will no longer be waterproof, which may cause it to malfunction.
• Remove the clipper from the AC adaptor when removing the

battery.

• Press the power switch to turn on the power and then keep the
power on until the battery is completely discharged.
• Perform steps 1 to 9 and lift the battery, and then remove it.
• Please take care not to short‑circuit the battery.

ER-GS60_CIS.indb 15







Forenvironmentalprotectionandrecyclingofmaterials
This clipper contains a Nickel‑Metal Hydride battery.
Please make sure that the battery is disposed of at an officially
assigned location, if there is one in your country.

Specifications

Power source See the name plate on the AC adaptor.
Motor voltage
1.2 V
220 V
Charging time
230 V
This product is intended for household use only.

Approx. 10 hours
Approx. 8 hours
15
2013/02/13 10:30:19