UsingTheClipper - Panasonic ER-GS60 Operating Instructions Manual

3. Slide the trimming height adjustment
lever to the left or right and adjust the
trimming height indication mark to the
number indicating the desired length.
3mm
adjustment
Trimming scaleandthe
length 3mm
(estimate) adjustment
indicator
positions
2 mm
3 mm
4 mm
5 mm
6 mm
7 mm
8 mm
9 mm
10 mm
• To trim to 1 mm length, use the 1 mm comb attachment.
• It can also be used without the comb attachment.
(Trimming height: approx. 0.5 mm)
• Actual hair length will be a little longer than the height you set.
10
ER-GS60_CIS.indb 10
Thetrimmingheightadjustment
leverandthetrimmingheight
indicatorpositions
2 mm 3 mm 4 mm
5 mm 6 mm 7 mm
8 mm 9 mm 10 mm

Usingtheclipper

• Make sure there is no damage to the blade.
• We recommend using the clipper in an ambient temperature
range of 0 – 35 °C. If used outside this range, the appliance may
stop operating.
Trimmingtheentireareainwet
• Trim in dry when trimming without the comb attachment.
• Wet trimming is recommended when trimming to approximately
5 mm or shorter lengths.
• When trimming in wet, you may not get desired results
depending on the length of the hair before trimming (should be
approximately 10 mm or longer) and/or hair condition (permed
hair, etc.).
For such cases, it is recommended to trim in dry.
1
1
Latherhairwithashampoo.
• Do not use any hair washing agent other than shampoo.
2
2
Softlyremovethefoamwithyourhands.
• Hair trimmings can easily accumulate on the comb
attachment when there is too much foam.
3
3
Attachthedesiredcombattachmenttothe
mainbody.
2013/02/13 10:30:16