Network Interface Box Connections; Didapi Configuration - Planmeca Proline XC Pan Calibration Manual

1.1 Network Interface Box (NIB) Connections (Figure 19)
NOTE: The above NIB connections are connecting to a computer in the same room as the x-ray and not over
a network.

1.2 Didapi Configuration

Click Start, All Programs, Planmeca, Didapi Configuration.
Click on Ethernet Interface.
The default ip address is 192.168.0.135
Click on Proline which will open Windows Notepad. Type in:
Save the file and click refresh. Close Didapi Configuration.
1. Crossover Cable (has red capped ends)
2. Y-connector, dongle
3. CAT-5 cable (port 1)
4. Power cable
1 2
localhost=(ip address):5120/1
3 4
- 16 -