Acer ARMC_3P User Manual page 35

C 3: C
HAPTER ONFIGURATION
The ARMC/3P settings for the host's keyboard type have to be correct in order to
make the remote keyboard work properly. Check the settings in the ARMC/3P
front-end. See Chapter 5: Keyboard/Mouse for details.
A common problem with KVM devices is the synchronization between the local and
remote mouse cursors. The ARMC/3P addresses this situation with an intelligent
synchronization algorithm. There are three mouse modes available on the
ARMC/3P.
Auto Mouse Speed
The automatic mouse speed mode tries to detect the speed and acceleration
settings of the host system automatically. See the section below for a more
detailed explanation.
Fixed Mouse Speed
This mode just translates the mouse movements from the Remote Console in
a way that one pixel move will lead to n pixel moves on the remote system.
This parameter n is adjustable with the scaling. It should be noted that this
works only when mouse acceleration is turned off on the remote system.
Single/Double Mouse Mode
This mode is described in the Section called Single and Double Mouse Mode.
The automatic mouse speed mode performs the speed detection during mouse
syn- chronization. Whenever the mouse does not move correctly, there are two
ways for re-synchronizing local and remote mouse:
Fast Sync
The fast synchronization is used to correct a temporary but fixed skew.
Choose this option from the Remote Console Options menu (entry: Mouse
Handling). If defined you may also press the mouse synchronization hotkey
sequence (see Chapter 4: Remote Console Control Bar details) .
Intelligent Sync
If the Fast Sync does not work or the mouse settings have been changed on
the host system, use the Intelligent Synchronization, instead. This method
adjusts the parameters for the actual movement of the mouse pointer so that
the mouse pointer is displayed at the correct position on the screen. This
method takes more time than the Fast Sync and can be accessed with the
appropriate item in the Remote Console Option menu (entry: Mouse
Handling).
The Intelligent Synchronization requires a correctly adjusted picture. Use the
Auto Adjustment function or the manual correction in the Video Settings panel
to setup the picture.
23