Controlling Audio; Way Speaker System Setup - Kenwood KW-V940BW Instruction Manual

Controlling Audio

Controlling Audio
You can adjust various settings such as audio
balance or subwoofer level.
1
Press the [FNC] button.
h Popup menu appears.
h
2
Touch [Audio].
See the following section for each
setting.
• Set up speaker/ X'over (P.73)
• Controlling equalizer (P.75)
• Set listening position/ DTA (P.79)
• Controlling general audio (Fader /
Balance) (P.75)
• Set volume offset (P.76)
• Performing zone control (P.77)
• Set sound effect (P.78)
• Memory/recall the audio settings
(P.81)
72

3 way speaker system setup

Select the appropriate crossover network
mode for the speaker system used (2-way or
3-way speaker system).
1
Press the [FNC] button.
h Popup menu appears. h
2
Touch [
].
h HOME screen appears. h
3
Touch [
].
h Source selection screen appears. h
4
Touch [AV Off].
5
Press the [FNC] (1) button and the [–] (2)
button for 1 second at the same time.
2
h Speaker system select screen appears. h
6
Select the crossover network mode.
h A confirmation screen appears.
h
7
Touch [Yes].
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Zone Control
– Fader for Controlling General Audio
– Front focus of Listening Position/ DTA
– Selection of the speakers to output sound from
the cell-phone of Blutooth HF/Audio
– Beep for User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
1