User Interface Setup - Kenwood KW-V940BW Instruction Manual

User Interface Setup

You can setup user interface parameters.
1
Press the [FNC] button.
h Popup menu appears. h
2
Touch [
].
h HOME screen appears.
h
3
Touch [
].
h SETUP screen appears.
h
4
Touch [User Interface].
h User Interface screen appears.
h
5
Set each parameter as follows.
■ [Beep]
Turn the key touch tone on or off.
Default is "ON".
[Information Window SETUP]
■
Set up the Information window displayed on
the Home screen. (P.16)
[Monitor Touch Control Effect]
■
Determine whether to show the trace of
finger under monitor touch control. (P.10)
"ON" (Default)/ "OFF"
[Parking Assist Display]
■
When an ADS adapter is connected, you can
display information about obstacles around
the car.
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels this function.
This can be set when the iDataLink
(commercially available) is connected.
[Parking Assist Position]
■
Select where to display information about
obstacles on the screen (left or right).
"Left"/ "Right" (Default)
This can be set when the iDataLink
(commercially available) is connected.
[Language Select]
■
Select a language.
[Touch Panel Adjust]
■
Adjust the sensing position of the touch
panel. (P.68)
[Time Format]
■
Select the time display format.
"12-Hour" (Default)/ "24-Hour"
■
[Clock]
[GPS-SYNC ](Default): Synchronizes the clock
time with the GPS.
[Manual]: Set the clock manually.
[Time Zone]
■
Select the time zone.
[Clock Adjust]
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.68)
[DISP Key]
■
Select the source screen displayed when
in the popup menu screen is pressed.
[OFF]: Displays the control screen of the
current source.
[Mirroring] (Default): Switches to the App
screen from the connected iPhone/
Android device or to the Apple CarPlay
screen from the connected iPhone when
the button is pressed. (P.23)
Setup
67
English