Sealey PC220 Instructions

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY
CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
1.1. ELECTRICAL SAFETY
FWARNING!
You must
Electricity at Work Act 1989
Health & Safety at Work Act 1974
Important:
DO NOT
DO NOT
DO NOT
a) Connect the GREEN/YELLOW earth wire to the earth terminal ‘E’.
b) Connect the BROWN live wire to the live terminal ‘L’.
c) Connect the BLUE neutral wire to the neutral terminal ‘N’.
d) After wiring, check that there are no bare wires, that all wires have been correctly connected, that the cable outer insulation
extends beyond the cable restraint and that the restraint is tight.
1.2 GENERAL SAFETY
!
!
!
!
invalidate your warranty.
!
% DO NOT
% DO NOT
I
DANGER! DO NOT vacuum very fine powders,hot or glowing ash, inflammable, explosive, corrosive or other dangerous substances.
s
% DO NOT
% DO NOT
DO NOT
%
% DO NOT
% DO NOT
!
2. CONTENTS
2.1. Carton content
PC220 & PC230
W E T & D RY VA C U U M C L E A N E R S
If in any doubt about electrical safety, contact a qualified electrician.
dispose of the plug safely.
DO NOT
Unauthorised parts and accessories may be dangerous and will invalidate your warranty.
PC220, PC230 & PC250
Blue
Neutral
Wire
Incorrect bags may cause machine faults and will
PC250
Yellow & Green
Earth Wire
Brown
Live
Wire
Cable
Restraint
FUSE RATING 13 AMP
DO NOT use solvents.