Tftp Configuration Commands; Tftp Get; Tftp Put - 3Com 5500G-EI Command Reference Manual

430 C 12: U
HAPTER SING
TFTP Configuration
Commands

tftp get

tftp put

S M C
YSTEM ANAGEMENT OMMANDS
View
FTP Client view
Parameter
None
Description
Use the
verbose
to disable verbose.
By default, verbose is disabled.
Example
Enable verbose.
[ftp]verbose
This section describes the Trivial File Transfer Protocol (TFTP) Commands on your
Switch 5500G-EI.
Syntax
tftp tftpserver
View
User view
Parameter
tftp-server :
server should be a string ranging from 1 to 20 characters.
Specify the filename of the source file on the TFTP server.
source-file
:
Specify the filename of the destination file which will be saved on the
dest-file :
switch.
Description
Use the
tftp get
TFTP server and save it with a different name on the switch.
Related command:
Example
Download the file LANSwitch.app from the TFTP server at
on the local switch.
vxWorks.app
<SW5500>tftp 1.1.3.214 get LANSwitch.app vxWorks.app
Syntax
tftp-server
tftp
command to enable verbose. Use the
get source-file
IP address or host name of the TFTP server. The name of the TFTP
command to download a file from the specified directory of the
.
tftp put
source-file
put
undo verbose
[ dest-file ]
1.1.3.214
dest-file
[ ]
command
and save it as