System-View; Telnet - 3Com 5500G-EI Command Reference Manual

undo sysname
View
System view
Parameter
text:
30 characters long. The default is SW5500.
Description
Use the
undo sysname
Changing the hostname of the Ethernet switch will affect the prompt of
command line interface. For example, if the hostname of the Ethernet switch is
MyHost
Example
To configure the hostname of the Switch to 3Com, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]sysname 3Com
[3Com]

system-view

Syntax
system-view
View
User view
Parameter
None
Description
Enter
Related commands:
Example
To enter system view from user view, enter the following:
<SW5500>system-view
System view: return to User View with Ctrl+Z.
[SW5500]

telnet

Syntax
telnet {
View
User view
Enter the host name of the Switch. The host name must be no more than
command to configure the host name of the Switch. Use the
sysname
command to restore the host name to the default of SW5500.
, the prompt in user view will be
to enter the system view from the user view.
system-view
,
quit return
hostname ip_address
|
Logging in Commands
.
<MyHost>
.
service_port
} [
43
]