Connecting The Stand Cable-Harness; The High-Voltage Connectors, Alternative Types - Siemens MAMMOMAT 300 Installation And Start-Up Instructions Manual

5-4

Connecting the stand cable-harness

The high-voltage connector, alternative types
Type A
Figure 4 The high-voltage connectors, alternative types
NOTE!
The high-voltage connector (1) is factory-adjusted for correct fit. Mount the angular ca-
ble-sleeve halves and sleeve nut (Type B only). The high-voltage connector shall be in-
serted with silicone oil, silicone-rubber ring (2) and silicone-rubber disc (3). Lubricate
the silicone-rubber disc and the pins with silicon oil before mounting the disc. Make sure
that there aren't any air bubbles between the disc and the connector.
Siemens-Elema AB
Solna, Sweden
3
1
2
Type B
SPS-UD RX B7-120.033.01.10.02
Cable connections
3
1
2
05.98
MAMMOMAT 300
65 02 186