Minimum System Requirements - Xilinx Varium C1100 Installation Manual

Table 1: Varium C1100 Compute Adaptor Features (cont'd)
Adaptor Component
Power Management
External Power Sources
Configuration Options
UART

Minimum System Requirements

The minimum system requirements for running the Varium C1100 compute adaptor are listed in
the following table.
Table 2: Minimum System Requirements
Component
Motherboard
System power supply
Operating system 1
System memory
Internet connection
Hard disk space
Licensing
Notes:
1. For the latest OS support, see XRT Release Notes (UG1451).
For details on the acceptable environmental conditions, see the Varium C1100 Compute Adaptor
Data Sheet (DS1003).
UG1525 (v1.0) September 17, 2021
Varium C1100 Compute Adaptor Installation Guide
Power management with system management bus (SMBus)
voltage, current, and temperature monitoring
75W PCIe slot functional with PCIe slot power only.
Provisioned with auxiliary power connector. However, the
adaptor is thermally designed to support 150W.
1 Gb Quad-SPI flash memory:
UltraScale+ device configurable over USB/JTAG and Quad-
SPI configuration flash memory
UART access through the micro-USB connector
Requirement
PCI Express 3.0-compliant with one full-height x16 slot.
®
150W via PCI Express slot connection and 8-pin PCI Express auxiliary power.
Linux, 64-bit:
•
Ubuntu: 16.04, 18.04, 20.04
•
CentOS: 7.6, 7.7, 7.8, 8.1, 8.2
•
RHEL: 7.6, 7.7, 7.8, 8.1, 8.2
For deployment installations, a minimum of 16 GB plus application memory
requirements is required.
For development installations, a minimum of 64 GB of system memory is
required, but 80 GB is recommended.
Required for downloading drivers and utilities.
Satisfy the minimum system requirements for your operating system.
None required for application deployment.
Chapter 1: Introduction
Varium C1100
www.xilinx.com
Send Feedback
6