Related Manuals for Projecta INTELLI-START
Summary of Contents for Projecta INTELLI-START
- Page 1 INTELLI-START LITHIUM EMERGENCY JUMPSTARTER and Portable Power Bank P/No. IS920, IS1220 Intelli-start.com...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION Please read this manual thoroughly before use and store in a safe place for future reference. WARNINGS • This unit has been designed for 12V vehicles only. • Risk of explosive gas. Working in the vicinity of car batteries can be dangerous. Batteries release explosive gases during normal operation, charging and while jumpstarting a battery. - Page 3 Once the Jumpstarter is fully charged, the RRT will shut off avoiding overcharging. LITHIUM SAFE • Intelli-Start Lithium Iron Phosphate (LiFePO ) batteries are specifically designed for cranking therefore purpose built for jumpstarting and are safer than Lithium Cobalt (LiCoO ) battery types.
-
Page 4: Usb Charging
POWER BANK WITH 2.1AMP USB PORT • Allowing charging of phones, tablets, and other small portable devices. 12V USB CHARGING • Allows the Jumpstarter to be charged from your vehicle USB socket or cigarette socket. PREMIUM SPARK FREE CLAMPS • Ensures safe jumpstarting. -
Page 5: Specifications
SPECIFICATIONS P/No. IS920 IS1220 Battery Battery Capacity 1.6Ah at 12.8V 3.0Ah at 12.8V 6,400mAh at 3.2V 12,000mAh at 3.2V 20.48Wh 38.4Wh Battery Chemistry Lithium Iron Phosphate (LiFePO Lithium Iron Phosphate (LiFePO Peak Amps 900A 1200A Clamp Power 240A 400A Voltage 12V only 12V only Number of Emergency Jumpstart... -
Page 6: Product Overview
PRODUCT OVERVIEW Premium Spark Durable Padded Free Clamps Carry Case Jumpstarter with Bridging Battery Status Clamp Charging Port Strap 2.1A USB Indicator Connection LED Accessory Port Battery Clamps Connection Port On/Off Jump Start LED Flood Override Light Button Flood Light Micro USB 12V 2.1A USB Charging On/Off... -
Page 7: Jump Starting
JUMPSTARTER INSTRUCTIONS Notes: • Instructions for negatively earthed vehicles only. (Most vehicles after 1970 are negatively earthed). • Before jumpstarting a vehicle make sure that the Jumpstarter is fully charged JUMPSTARTING Step Instruction Display Your Jumpstarter should be charged for around 8 hours prior to first use and as soon as possible after each use. -
Page 8: Battery Status Indicator
Note: In general, with the use of Rapid Recharge Technology (RRT) the Jumpstarter does not require charging. However, while not in use it is recommended to check the Jumpstarter’s charge status via the BATTERY STATUS INDICATOR. If required, charge the Jumpstarter using the supplied 12V USB charger or a 3rd party 10W 240VAC USB adaptor (not provided). - Page 9 CHARGING Your Jumpstarter is shipped partially charged. Therefore, you should charge the Jumpstarter before using it for the first time. It is recommended to fully charge the Jumpstarter after each use to ensure it is ready to use when required using one of the methods below: Option Detail...
-
Page 10: Flood Light
FLOOD LIGHT Step Detail Display Press the light button and the light will turn on. Press the light button again to turn the light off when you are finished. Note: If the Jumpstarter is off and the light button is pressed, the button will need to be pressed for at least half a second before the light will turn on. -
Page 11: Frequently Asked Questions
FREQUENTLY ASKED QUESTIONS Why didn’t my Jumpstarter start my vehicle? There could be a number of reasons why the Jumpstarter did not start your vehicle. Check the following: 1. Ensure the Jumpstarter battery is fully charged. Refer to page 8 (‘Battery Status Indicator’) for further information. -
Page 12: Warranty Statement
Phone: (03) 9730 6000 Fax: (03) 9730 6050 National Toll Free: 1800 113 443 NEW ZEALAND OFFICE Griffiths Equipment Ltd. 19 Bell Avenue, Mount Wellington, Auckland 1060, New Zealand Phone: (09) 525 4575 Fax: (09) 579 1192 IS476 Intelli-start.com Issue 10.03.2021...
Need help?
Do you have a question about the INTELLI-START and is the answer not in the manual?
Questions and answers