Related Manuals for Projecta LS950
Summary of Contents for Projecta LS950
- Page 1 LITHIUM START 12V EMERGENCY LITHIUM JUMPSTARTER AND PORTABLE POWER BANK P/No LS950, LS1250...
- Page 2 • Not intended for people (including children) with reduced physical or mental capability. • Do not drive the vehicle with the LS950 or LS1250 still attached to the battery. IMPORTANT CHARGING INFORMATION •...
- Page 3 FEATURES LS950 The LS950 is suitable for starting most 12V Petrol vehicles up to 6 litres and diesel vehicles up to 3.2litres. LS1250 The LS1250 is suitable for starting most 12V Petrol vehicles up to 7 litres and diesel vehicles up to 4.5litres.
-
Page 4: Specifications
SPECIFICATIONS P/No. LS950 LS1250 Battery Battery Type Lithium Iron Phosphate Battery Capacity 8,000mAhr 16,000mAhr 25.6Whr 51.2Whr 2Ahr at 12.8V 4Ahr at 12.8V Battery Short Circuit Current 950A 1250A Clamp Power 290A 400A Number of Jumpstarts 7 Starts (Petrol) 14 Starts (Petrol) - Page 5 PRODUCT OVERVIEW Digital Screen Displays Vehicle and Jumpstarter Voltage Jumpstarter Charging Port Battery Clamps Connection Port 240V and 12V cigarette lighter plug chargers Premium Spark Free Clamps Micro USB Charging Lead...
- Page 6 VEHICLE JUMPSTARTING INSTRUCTIONS 1. Your Jumpstarter should be charged for 8 hours prior to first use and as soon as possible after each use. 2. Before making any connections, check the Jumpstarter battery status by turning on the Jumpstarter. The Jumpstarters battery capacity should show at least 2 bars or 50% charged.
- Page 7 DC CHARGING, while driving. 1. Plug the DC adaptor into the jumpstarter’s charging port. 2. Connect the Cigarette plug to the vehicles Cigarette power socket, and start the car. The LCD will now display CHARGING. 3. When the battery is charged the LCD display will show FULLY CHARGED and the jumpstarter will stop charging.
-
Page 8: Trouble Shooting
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE REMEDIES NON STOP CRANKING scrolled on The jumpstarter is in over-discharge 1. Press JUMPSTART button to reset display of the LCD and beeping protection mode. Cranking for more the alarm, then again to resume than 8 seconds. jumpstarting. - Page 9 TROUBLE SHOOTING (continued) PROBLEM POSSIBLE CAUSE REMEDIES USB doesn’t work 1. Improper USB connections 1. Check the USB connections are 2. The internal battery charge is correct too low 2. Check the internal battery capacity and recharge Cannot turn on the Jumpstarter The internal battery’s charge is Recharge the jumpstarter too low...
-
Page 10: Frequently Asked Questions
5. Ensure the vehicle being jumpstarted does not require a clamp output greater than 290 Amps (LS950) or 400 Amps (IS1250) in order to jumpstart the vehicle. Q. Can I leave my Jumpstarter connected to the car after it has started? A. - Page 11 NOTES...
- Page 12 WARRANTY STATEMENT Applicable only to product sold in Australia Brown & Watson International Pty Ltd of 1500 Ferntree Gully Road, Knoxfield, Vic., telephone (03) 9730 6000, fax (03) 9730 6050, warrants that all products described in its current catalogue will under normal use and service be free of failures in material and workmanship for a period of one (1) year (unless this period has been extended as indicated elsewhere) from the date of the original purchase by the consumer as marked on the invoice.
Need help?
Do you have a question about the LS950 and is the answer not in the manual?
Questions and answers