SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)
Series
User Manual
N
o.
4
Issue 07 (2021-07-08)
Parameter
Description
PV string N
Set this parameter based on the type of the
access type
PV string connected to DC input terminal
of the inverter. Currently, the options are as
NOTE
follows: Automatic identification (default
N is the DC input
terminal number
value), Disconnection, Single PV string,
of the inverter.
and 2 in 1.
You are advised to retain the default value.
If the value is incorrectly set, the PV string
access type may be incorrectly identified
and alarms may be generated by mistake
for the PV string connection status.
Copyright © Huawei Technologies Co., Ltd.
B String Access Detection
Remark
s
N
112