Doosan DX35Z Operation And Maintenance Manual page 87

Closing the Window
Be careful that your hands are not caught in window
frame.
1. Lower bucket to ground.
2. Set safety lever (Figure 39) on "LOCK," and shut down
engine.
3. Holding lock levers (1, Figure 41) of front window with
left and right-hand, turn the lock levers towards outside
edge of window to release the lock.
4. Push window forward, and lower it slowly.
5. When the bottom of the window reaches the top of the
front bottom window, push the front window forward.
Turn the lock levers towards frame to engage the lock.
6. Check that lock levers are securely latched in the lock
position.
Front Bottom Window
The front bottom window can be removed and stored in the
rear of the cabin.
1. After stowing the front upper window in the cabin
ceiling, remove bottom window (1, Figure 42) from
cabin in direction of the arrow.
2. Set bottom window in rubber holders (2, Figure 43)
behind operator's seat. Secure window with left and
right knobs (3) with push button (4).
Never have wet hands when handling a window.
Never drop window or let it come into contact with
other parts of the machine.
Operating Controls
WARNING!
WARNING!
1
Figure 41
1
Figure 42
4
3
2
Figure 43
FG008066
FG007541
FG007542
OP000469
2-27