Lifting With Sling - Doosan DX35Z Operation And Maintenance Manual

LIFTING WITH SLING

Improper lifting can allow load to shift and cause injury
or damage.
1. Refer to "Specification" on page 7-1 of this manual for
information on weight and dimensions.
2. Use properly rated cables and slings for lifting.
3. Position machine for a level lift.
4. Lifting cables should have a long enough length to
prevent contact with the machine. Spreader bars may
be required.
If spreader bars are used, be sure that cables
NOTE:
are properly secured to them and that the angle
of the cables is factored into the lift strength.
Transportation
5-4
WARNING!
Figure 8
FG008073
OP000472