Table of Contents
Advertisement
To Do This ...
Go to the Device List
Change the audio being played from the
TV to the current selected device, and
vice versa
Play a recording from the selected
i.LINK camcorder or digital VCR
Fast-forward or rewind a recording from
the selected i.LINK camcorder or digital
VCR
Record from the TV to the selected
i.LINK digital VCR
Stop a recording from the selected
i.LINK digital VCR
Turn the selected device power on and
off
Setup the selected device
Notes About Controlling i.LINK Devices
s
You can control the functions of the selected i.LINK device by using the equivalent buttons on the TV's
remote control. To program the remote control to operate i.LINK devices, see "Programming the
Remote Control" on page 52.
s
Some options on the i.LINK Control Panel may not be available, depending on the device being
controlled.
s
Only i.LINK-equipped digital camcorders and digital VCRs can be controlled directly through the
i.LINK Control Panel.
s
Not all functions are supported for all i.LINK devices.
s
When operating the i.LINK device by using the i.LINK Control Panel, set remote control's function
LED to TV.
92
Do This ...
V v B b
Press
to highlight
Press
V v B b
to highlight
to the window that currently has sound.
Press
V v B b
to highlight
V v B b
Press
to highlight
If the
(record) button is available, press
and press
.
V v B b
Press
to highlight
V v B b
Press
to highlight
V v B b
Press
to highlight
see page 93.
Back to Device List
and press
Swap Audio
and press
and press
.
or
and press
V v B b
and press
.
Power
and press
.
Setup
and press
. For more details on Setup,
.
. An icon appears next
.
to highlight
Advertisement
Table of Contents
