Table of Contents
Advertisement
Button
Description
qf Power
SAT/CABLE*:
Buttons
cable box, and other audio/video equipment you have
programmed into the remote control. For instructions, see
"Programming the Remote Control" on page 52.
POWER:
qg RESET
Press to reset the settings to the factory defaults. See pages 96
and 99. Also used to clear Favorite Channels (see page 63).
If FUNCTION is switched on DVD/VCR
z REC
Press to record a program.
qh TV/VIDEO
Press repeatedly to cycle through the video equipment
connected to the TV's video inputs.
qj DISPLAY
Press once to display the current channel number, current time,
and channel label. If set, the current channel number will
display for 10 seconds.
qk JUMP
Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel
that was selected.
ql 0 - 9
Press
ENTER
seconds. Press
w; FAVORITES
Press to display the Favorite Channels list. For details, see
page 63.
wa FREEZE
Press to freeze the picture. Press again to restore the picture.
For details, see "Using the Freeze Function" on page 64.
ws i.LINK
Press to display the i.LINK Control Panel. For information on
using the i.LINK Control Panel, see page 91.
wd
Press to display the Memory Stick Menu. For details, see
MEMORY
"Using the Memory Stick Viewer" on page 71.
STICK
wf MENU
Press to display the Menu. Press again to exit from the Menu.
For details, see page 95.
wg CH +/–
Press to scan through channels. To scan quickly through
channels, press and hold down either CH.
* If not Sony brand, requires that you first program the remote control (page
52).
Press to turn on and off the satellite receiver,
Press to turn on and off the TV.
0 - 9
to select a channel; the channel changes after 3
ENTER
to change channels immediately.
51
Advertisement
Table of Contents
