8.9
Registering Groups/Blocks Name
8.9.1 Registering Name of Group (Block)
(1)
(2)
(7)
(4)
(3)
NOTES:
• The name of the Group (Block) input is possible with a maximum of 16 characters. Display of 8 characters per
line, the 9th character will have to start on the second line.
• Name Register selection screen may be different depending on the control pattern.
• The heading will be only displayed in 1 line, even if a new line is entered to display the title of the Group (Block).
• The title of the Group (Block) cannot be registered as blank. If it is left blank and "Register" is selected, the title
of the factory default will be displayed.
36
(1) Select "Group Name Register" from
the screen of "Menu".
(2) Select the target (block or group) to
register the name.
(3) The character Input screen will be
displayed.
* Select the letter type from "ABC",
"abc", "Symbols 1", "Symbols 2"
or "Symbols 3".
(4) Enter the group (block) name.
(5)
(5) Tap "Delete" to delete the character
on the left side of the cursor.
(6) When input character is completed,
tap "Register" to confirm name.
The screen will return to the
selection screen (2).
(7) When register group name is
completed, tap "Menu" at the
selection screen (2) to return to
menu screen.
(6)
P5415644