Fan Speed Setting; Fan Speed Setting - Hitachi PSC-A32MN Operation Manual

7.7 Fan Speed Setting
<Monitor (All Groups)>
(1)
(3)
NOTES:
• By tapping "<" or ">" at the detailed setting screen, the Fan Speed will be switched to another group in the same
block.
• Control Restricted (Run/Stop Only) : In case of "Enable", each Setting Change is for all Groups or Blocks.
Setting Change is not possible for each Group.
• Actual fan speed during the dry operation will be "LOW" regardless of the fan speed setting.
• The figure above shows an example of a connected Air Conditioner Unit. The Fan Speed may not be indicated
in certain case.
• If the settings are mixed when multiple groups are selected, the display will remain blank.
P5415644
<Monitor (Block)>
(1)
(2)
(1) Select the target group at screen of
"Monitor (All Groups)" or "Monitor
(Block)" to change the fan speed
setting.
The pop-up of "Setting" for the
selected group is displayed on the
touchscreen.
(2) By tapping " " or " " at the Fan
Speed, it will switch in this order:
"LOW", "MEDIUM", "HIGH",
"HIGH2", "AUTO".
LOW
MEDIUM
HIGH
HIGH2
AUTO
* "HIGH2" or "AUTO" may not be
indicated depending on the type
of the Air Conditioner.
(3) Tap "Monitor screen" to return to
Monitor screen.
15