Switching Music Sources; Voice Commands - Cardo Systems PACKTALK BOLD Manual

To turn on the FM radio:
Tap twice or say "Hey Cardo, radio on."
●
When you switch on your FM radio, the station that was playing when you last switched off resumes
playing.
To turn the FM radio off:
Tap the Control Wheel or say "Hey Cardo, radio off."
●
To skip to the next station:
Tap or say "Hey Cardo, next station."
●
To skip back to the previous station:
Tap twice or say "Hey Cardo, previous station."
●
To scan for and select a station:
1. Press down the Control Wheel and simultaneously roll it inward.
The FM radio plays each station that it finds for several seconds.
2. When you hear a station you want to select, tap
To store a scanned station in the active preset:
Tap within 20 seconds of stopping the scan.
●
To toggle between FM and ATDP music:
Press for 2 seconds.
●

3.5 SWITCHING MUSIC SOURCES

If two music (A2DP) audio sources are paired, PACKTALK BOLD uses the audio source from which you last
played music.
To switch to the other audio source:
1. Stop music (A2DP) playback from the current device (see
2. Play music (A2DP) from the other device.
PACKTALK BOLD automatically remembers your last played device.

3.6 VOICE COMMANDS

You can use voice commands for hands-free operation of certain PACKTALK BOLD features. Voice
commands use voice recognition. You loudly say a command and PACKTALK BOLD performs the action.
Voice commands are available in various languages. English is the default language. You can change the
language to another available language.
PACKTALK BOLD uses the following predefined voice commands.
.
Streaming Music
10
on page 9).