Table of Contents
Advertisement
NOTICE
If you operate the boat with the motor
trimmed beyond the maximum trim posi-
tion, the water intake holes may be above
the water line, causing severe engine
damage due to overheating.
Never operate the boat with the motor
trimmed beyond the maximum trim posi-
tion.
TRIM TAB ADJUSTMENT
This adjustment is used to compensate for the
possible tendency of your boat to veer slightly
to port or starboard. This tendency could be
due to such things as propeller torque, motor
mounting position, etc.
To adjust the trim tab:
1. Loosen the bolt A that holds the trim tab in
place.
2. If the boat tends to veer to port, move the
rear end of the trim tab toward the port side.
If the boat tends to veer to starboard, move
the rear end of the trim tab toward the star-
board side.
3. Tighten the bolt that holds the trim tab in
place.
After adjusting the trim tab, check to see if the
boat still tends to veer to one side. If necessary,
readjust the trim tab.
25
- Quick Links:
- Engine Oil
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DF140A and is the answer not in the manual?
Questions and answers
Defaut change oil sur ODB
The oil change default code for a Suzuki DF140A means the engine has reached its preprogrammed operating hours for an oil change. When this occurs, the OIL lamp will flash, and if the engine is not running, a buzzer will emit a series of double beeps. This is a reminder to replace the engine oil based on the maintenance schedule. The indication will repeat until the system is manually canceled.
This answer is automatically generated