Related Manuals for NI REM-11175
Summary of Contents for NI REM-11175
- Page 1 sales@artisantg.com artisantg.com (217) 352-9330 | Visit our website - Click HERE...
- Page 2 This document explains how to connect to the REM-11175. Note The guidelines in this document are specific to the REM-11175. The other components in the system might not meet the same safety ratings. Refer to the documentation for each component in the system to determine the safety and EMC ratings for the entire system.
-
Page 3: Electromagnetic Compatibility Guidelines
Furthermore, any changes or modifications to the product not expressly approved by National Instruments could void your authority to operate it under your local regulatory rules. Preparing the Environment Ensure that the environment in which you are using the REM-11175 meets the following specifications. Operating temperature -25 °C to 60 °C... -
Page 4: Verifying The Kit Contents
Verifying the Kit Contents Verify that the following items are included in the REM-11175 kit. Figure 1. REM-11175 Kit Contents 1. NI REM-11175 3. Supply voltage connector 2. Bus connector 4. Spring-terminal block (x8) Unpacking the Kit Caution To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. - Page 5 White Bus coupler, power module Installing Bus Connectors What to Use • Bus connector • DIN rail What to Do Complete the following steps to install bus connectors on the DIN rail. 4 | ni.com | REM-11175 Getting Started Guide...
-
Page 6: Installing The Module
Repeat Steps 2 and 3 for additional bus connectors. Installing the Module What to Use • REM-11175 • Mounted bus connector What to Do Complete the following steps to install the REM-11175 on the DIN rail. REM-11175 Getting Started Guide | © National Instruments | 5... - Page 7 Note Verify that the bus connector socket aligns with the socket on the underside of the module. Press the REM-11175 directly onto the bus connector and DIN rail until it clicks into place. Caution Tilting the module when mounting it on the DIN rail will damage the contacts.
- Page 8 Blue Reference potential of the supply voltage (internally jumpered) 00 to 07 Orange DO0...DO7 Digital outputs 0 to 7 40 to 47 Orange DO8...DO15 Digital outputs 8 to 15 REM-11175 Getting Started Guide | © National Instruments | 7...
- Page 9 The REM-11175 is ready for operation. Green Flashing Data is invalid or unavailable. The REM-11175 cannot communicate with Green/Yellow Flashing the connected devices. The REM-11175 did not detect a valid cycle Solid after power-on. Yellow The REM-11175 is not part of the Flashing configuration.
- Page 10 D0 (0:7) 24 VDC – REM-11175 • DO terminals supply the digital output voltages. • GND provides a path for return current to flow. • The output switches the load directly. REM-11175 Getting Started Guide | © National Instruments | 9...
-
Page 11: Connection Guidelines
Connection Guidelines • Make sure that devices you connect to the REM-11175 are compatible with the module specifications. • Push the wire into the terminal when using a solid wire or a stranded wire with a ferrule. - Page 12 If you want to remove a bus connector in the middle of the system, you must remove any modules or bus connectors following the desired connector or slide them along the DIN rail at least 15.0 mm (0.60 in.). REM-11175 Getting Started Guide | © National Instruments | 11...
-
Page 13: Where To Go Next
NI corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas, 78759-3504. NI also has offices located around the world. For telephone support in the United States, create your service request at ni.com/support... - Page 14 United States, visit the Worldwide Offices section of ni.com/ niglobal to access the branch office websites, which provide up-to-date contact information, support phone numbers, email addresses, and current events. REM-11175 Getting Started Guide | © National Instruments | 13...
- Page 15 . You can find information about end-user license agreements (EULAs) ni.com/patents and third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at ni.com/ for the NI global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other legal/export-compliance import/export data.
Need help?
Do you have a question about the REM-11175 and is the answer not in the manual?
Questions and answers