Husqvarna 536LiL Workshop Manual page 66

Troubleshooting - annexe
3. Breaker signal contact
Apply grease between the contacts specified
below. Grease is to be applied between contacts
1, 2 and 3, 4, and also on the inside.
3. Trigger switch signal connector with
grease
Apply grease between the specified pins,
grease should be applied between pins 1, 2 and
3, 4 inside as well as outside.
4. Communication cabling
Make sure the three small communication connec-
tors are fixed securely and are not damaged.
4. Communication cables
Make sure the three small communication cables
are not loose or damaged.
66 –
English