Crestron DM-NVX-E760 Product Manual
  1. Manuals
  2. Brands
  3. Crestron Manuals
  4. Media Converter
  5. DM-NVX-E760
  6. Product manual

Crestron DM-NVX-E760 Product Manual

4k60 4:4:4 hdr network av encoder with dm input
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DM-NVX-E760 and DM-NVX-E760C
DM NVX® 4K60 4:4:4 HDR Network AV
Encoder with DM® Input
Product Manual
Crestron Electronics, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DM-NVX-E760 and is the answer not in the manual?

Questions and answers

Related Manuals for Crestron DM-NVX-E760

Summary of Contents for Crestron DM-NVX-E760

  • Page 1 DM-NVX-E760 and DM-NVX-E760C DM NVX® 4K60 4:4:4 HDR Network AV Encoder with DM® Input Product Manual Crestron Electronics, Inc.
  • Page 2 Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource. Crestron, the Crestron logo, Crestron Toolbox, DM, DM 8G+, DM Lite, DM NAX, DM NVX, DM NVX Director, DigitalMedia, and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.

  • Page 3: Table Of Contents

    Status and Configuration DMF-CI-8 Chassis Details Using the Web Interface Using SIMPL Windows DM NVX Director Virtual Switching Appliance IGMP Snooping Crestron XiO Cloud Service Connection Automatic Point-to-Point Connectivity Using the Web Interface Using SIMPL Windows Stream Statistics Using the Web Interface...
  • Page 4 Using the Web Interface Using SIMPL Windows Enterprise-Grade Security Authentication Management IEEE 802.1X Authentication Automatic Firmware Update Troubleshooting Appendix: Device Discovery ii • Contents Product Manual — Doc. 8918B...

  • Page 5: Introduction

    DM® input for interoperability with DM 8G+® output devices and DM Lite® transmitters. Certified using HDBaseT® technology, the DM input is also compatible with third-party HDBaseT products. The DM-NVX-E760 and DM-NVX-E760C enable AV signals from the DM input to be transmitted over the network to one or many DM NVX decoders.

  • Page 6: Physical Description

    DM-NVX-E760 (below) DM-NVX-E760C (on page 5) encoders. DM-NVX-E760 This section provides information about the front and rear panels of the DM-NVX-E760. Front Panel The following illustration shows the front panel of the DM-NVX-E760. DM-NVX-E760 Front Panel CONSOLE: (1) Micro USB connector, female;...
  • Page 7 Connects to the DM 8G+ output of a DM® switcher, transmitter or other DM device; to the DM Lite port of a DM Lite transmitter; or to an HDBaseT device via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable (2) LEDs, green indicates DM link status, amber indicates video and HDCP signal...

  • Page 8: Rear Panel

    If the DM-NVX-E760 encoder is connected to a DM-NVX-35x(C) decoder, pressing the SETUP button on the DM-NVX-E760 for less than 10 seconds displays the IP address of the decoder on the display connected to the decoder.

  • Page 9: Dm-Nvx-E760C

    (2) LEDs, green indicates Ethernet link status, amber indicates Ethernet activity Ethernet 3: (1) SFP port; Ï Accepts one Crestron SFP-1G Series transceiver module (sold separately) (1) LINK LED, green indicates Ethernet link status (1) ACT LED, green indicates Ethernet activity DM INPUT: (1) 8-pin RJ-45 connector, female, shielded;...
  • Page 10 Balanced/unbalanced stereo line-level audio output, functional only when the device is receiving a 2-channel stereo input signal; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced 6 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...

  • Page 11: Status And Configuration

    SIMPL Windows as applicable: DMF-CI-8 Chassis Details (on the next page) DM NVX Director Virtual Switching Appliance (on page 9) IGMP Snooping (on page 10) Crestron XiO Cloud Service Connection (on page 13) Automatic Point-to-Point Connectivity (on page 14) Stream Statistics (on page 15) Image Preview (on page 17) Multicast TTL (Time-to-Live) (on page 20)

  • Page 12: Dmf-Ci-8 Chassis Details

    F> serial output join to report the serial number of the chassis in which the card is installed. Program the <CardSlotInfo_F> serial output join to report the slot number in which the card is installed in the chassis. 8 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...

  • Page 13: Dm Nvx Director Virtual Switching Appliance

    NVX Director. The DM NVX Director section displays the following information: DM NVX Director host name Domain name, domain number, and domain slot number to which the DM NVX device is assigned Status Tab - DM NVX Director Product Manual — Doc. 8918B DM-NVX-E760 and DM-NVX-E760C • 9...

  • Page 14: Igmp Snooping

    Settings Tab - System Setup, Network Interface NOTE: When a different IGMP snooping support version is selected, the DM NVX device must be rebooted in order for the change to take effect. 10 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...
  • Page 15 Do not assign reserved multicast IP addresses to a DM NVX device for streaming. For additional information, go to https://www.iana.org/assignments/multicast- addresses/multicast-addresses.txt. Multicast collision is a concern with IPv4. For example, multicast IPv4 addresses 224.8.7.6 and 229.136.7.6 translate to the same MAC address (01:00:5E:08:07:06). Product Manual — Doc. 8918B DM-NVX-E760 and DM-NVX-E760C • 11...
  • Page 16 If the network switch supports IGMP fast leave, enable the configuration at the port, global, or VLAN level. If the network switch supports PIM snooping, enable the configuration to prevent flooding IP multicast traffic toward multicast router (mrouter) ports. 12 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...

  • Page 17: Crestron Xio Cloud Service Connection

    Crestron XiO Cloud Service Connection The Crestron XiO Cloud® service allows supported Crestron devices across an enterprise to be managed and configured from one central and secure location in the cloud. Connection to the Crestron XiO Cloud service can be enabled or disabled using the web interface.

  • Page 18: Automatic Point-To-Point Connectivity

    Automatic Point-to-Point Connectivity Point-to-point connectivity enables the DM-NVX-E760(C) to be connected directly to a DM NVX decoder to stream video and audio. Rather than being connected to an Ethernet switch, a 1000BASE-T Ethernet port of the DM-NVX-E760(C) is connected directly to a 1000BASE-T port of the decoder.

  • Page 19: Using Simpl Windows

    Settings Tab - System Setup, Point-to-Point Control Using SIMPL Windows Using the top-level programming slot for the DM-NVX-E760(C) device, set the <PointToPointMode> analog input join to the desired value. For additional information, refer to the SIMPL Windows help file. Stream Statistics Statistics can be displayed to indicate the number of packets transmitted and dropped.

  • Page 20: Using Simpl Windows

    To disable statistics, trigger the <StatisticsDisabled> digital input join. To clear the statistics, trigger the <ResetStatistics> digital input join. The corresponding serial joins are updated when the digital input joins are triggered. For additional information, refer to the SIMPL Windows help file. 16 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...

  • Page 21: Image Preview

    Image preview provides still images (thumbnails) that show the current video being received by the DM® input of the DM-NVX-E760 or DM-NVX-E760C. Still images are shown at one frame per second. Image preview supports the maximum resolution of the source and scales the image while maintaining the aspect ratio.

  • Page 22: Using The Web Interface

    Using the Web Interface Configure image preview by clicking the Settings tab and then clicking Stream. Settings Tab - Stream, Image Preview (Sample Image Shown) 18 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...
  • Page 23 DM NVX web server. 172.30.160.90 is the IP address of the DM NVX device. preview_540px.jpeg is the file name of the image preview file. Product Manual — Doc. 8918B DM-NVX-E760 and DM-NVX-E760C • 19...

  • Page 24: Using Simpl Windows

    5. Enable Auto Initiation by setting the Auto Initiation toggle switch in the On (right) position. The stream automatically restarts. NOTE: Disabling Custom TTL returns the TTL value to the default setting. 20 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...

  • Page 25: Using Simpl Windows

    2. In Slot-01: Stream Transmit, set the <MulticastTTL> analog input join to the desired value (1 to 255). 3. Using the top-level programming slot, trigger the <AutomaticInitiationEnabled> digital input join. The stream automatically restarts. For additional information, refer to the SIMPL Windows help file. Product Manual — Doc. 8918B DM-NVX-E760 and DM-NVX-E760C • 21...

  • Page 26: Differentiated Services Code Point (Dscp)

    5. Enable Auto Initiation by setting the Auto Initiation toggle switch in the On (right) position. The stream automatically restarts. NOTE: Disabling DSCP returns the DSCP value to the default setting. 22 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...
  • Page 27 Settings Tab - Stream, Custom DSCP Product Manual — Doc. 8918B DM-NVX-E760 and DM-NVX-E760C • 23...

  • Page 28: Adaptive Bit Rate

    Enable Adaptive Bitrate by setting the Adaptive Bitrate toggle switch in the On (right) position. Disable Adaptive Bitrate by setting the Adaptive Bitrate toggle switch in the Off (left) position. By default, adaptive bit rate functionality is disabled. 24 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...

  • Page 29: Using Simpl Windows

    2-channel AES67 source while another 2-channel AES67 audio stream is received from a Crestron DSP or other third-party device and combined with the video signal. The received AES67 audio stream can be output via the analog audio output.

  • Page 30: Using The Web Interface

    Configure DM NAX (AES67) audio in the DM NAX (AES76) and Routing sections under the Settings tab. Configuring DM NAX (AES67) Audio Configure DM NAX (AES67) audio by clicking the Settings tab and then clicking DM NAX (AES67) Audio. 26 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...
  • Page 31 Automatic, which adds 1 to the outgoing video stream multicast address. For example, if the video multicast address is 239.8.0.0, the DM NAX (AES67) multicast address is automatically set to 239.8.0.1. Product Manual — Doc. 8918B DM-NVX-E760 and DM-NVX-E760C • 27...
  • Page 32 In the Input Routing section, set Audio Source to DM NAX (AES67) Audio and then click Save Changes in the upper-right corner of the web page. The Active Audio Source setting is displayed as DM NAX (AES67) Audio. 28 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...

  • Page 33: Using Simpl Windows

    Settings Tab - Routing, DM NAX (AES67) Audio Using SIMPL Windows Using the top-level programming slot for the DM-NVX-E760(C) device, set the <AnalogAudioSource> analog input join to DM NAX (AES67) audio as the audio source for the analog audio output.

  • Page 34: Dm Input

    DM Input The DM INPUT port on the DM-NVX-E760 and DM-NVX-E760C enables an AV signal from a DM 8G+® output device or DM Lite® transmitter to be transmitted over the network to one or more DM NVX decoders. The DM INPUT port can be connected to the DM 8G+ output of a DM switcher, transmitter, or other DM device.
  • Page 35 Settings Tab - Inputs Product Manual — Doc. 8918B DM-NVX-E760 and DM-NVX-E760C • 31...

  • Page 36: Using Simpl Windows

    For additional information, refer to the SIMPL Windows help file. Still Image Detection Still image detection enables the DM-NVX-E760(C) endpoint to detect a still image and pass the information to a control system. Still image detection occurs when a sync is detected at the DM input and 5 seconds have elapsed in which no motion occurred within the image.

  • Page 37: Network Port Selection

    Video (default setting is port 1). Ethernet ports 1, 2, and 3 are available for use. Audio/NAX (default setting is port 1) Ethernet ports 1, 2, and 3 are available for use. 4. Click Save Changes to apply the new settings. Product Manual — Doc. 8918B DM-NVX-E760 and DM-NVX-E760C • 33...
  • Page 38 Settings Tab, Port Selection (DM-NVX-E760C Page Shown) 34 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...

  • Page 39: Test Pattern Generator

    The DM-NVX-E760(C) can send the test pattern to any routed DM NVX decoder. The test pattern generator can be configured using the web interface or SIMPL Windows.
  • Page 40 1. In the Test Pattern drop-down list, select the desired test pattern. Available options are listed in the following table. Test Pattern Test Pattern Option Off (default Disables the test pattern generator setting) SMPTE ColorBars Black White 36 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...
  • Page 41 Test Pattern Test Pattern Option Vertical Lines Grid Color Bars Product Manual — Doc. 8918B DM-NVX-E760 and DM-NVX-E760C • 37...
  • Page 42 2. In the Resolution drop-down list, select the desired resolution of the test pattern. Available options are the following: 3840x2160p60 RGB 8-bit 3840x2160p60 Y420 8-bit 3840x2160p30 RGB 8-bit 1920x1080p60 RGB 8-bit 720p60 RGB 8-bit 38 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...

  • Page 43: Using Simpl Windows

    Configure authentication management in the web interface by clicking the Security tab. For detailed information, refer to the online help of the web interface. Security Tab - Authentication Management of Users and Groups Product Manual — Doc. 8918B DM-NVX-E760 and DM-NVX-E760C • 39...

  • Page 44: Ieee 802.1X Authentication

    LAN. Configure IEEE 802.1X authentication in the web interface by clicking the 802.1x Configuration tab. For detailed information, refer to the online help of the web interface. 802.1X Authentication Tab 40 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...

  • Page 45: Automatic Firmware Update

    A DM NXV device can be automatically updated with the latest firmware at scheduled intervals. To configure automatic firmware update: 1. Using the Crestron Auto Update Tool, generate a manifest file (*. mft). The file is placed on an FTP (File Transfer Protocol) or SFTP (Secure File Transfer Protocol) server.
  • Page 46 Settings Tab - Auto Update 42 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...

  • Page 47: Troubleshooting

    Crestron HDMI® cable is not Use Crestron HDMI cable only. being used. Crestron HDMI cable Use Crestron HDMI cable that does not exceeds the maximum exceed 20 ft (6.1 m). length of 20 ft (6.1 m). The display flashes to a Switching between HDR and No action required.
  • Page 48 In the Action menu located in the upper-right corner of the web interface, click Restore. From the Tools menu in the Crestron Toolbox software, select Text Console and issue the restore command. Power cycle the device 11 times. After the eleventh power cycle, wait until the device boots and then press the SETUP button for 5 seconds.

  • Page 49: Appendix: Device Discovery

    ) in the Crestron Toolbox software toolbar. The security software running on the computer may send a program alert regarding the attempt of the Crestron Toolbox software to connect to the network. Allow the connection so that the Device Discovery Tool can be used.
  • Page 50 The user name and password are case sensitive. 7. Click Sign In. The Status page of the DM NVX device opens. For additional information, refer to the online help of the web interface. 46 • DM-NVX-E760 and DM-NVX-E760C Product Manual — Doc. 8918B...
  • Page 51 This page is intentionally left blank. Product Manual — Doc. 8918B DM-NVX-E760 and DM-NVX-E760C • 47...
  • Page 52 Product Manual — Doc. 8918B Crestron Electronics, Inc. 15 Volvo Drive, Rockleigh, NJ 07647 07/08/21 Tel: 888.CRESTRON Specifications subject to Fax: 201.767.7656 change without notice. www.crestron.com...

This manual is also suitable for:

Dm-nvx-e760c

Table of Contents