Section 1. Prepare The Bubbler; Product Contents; Remove Bubbler Lens - Jandy TruFit Bubbler Owner's Manual

Page 4
Section 1.

Product Contents

ITEM
1
2 Lens Removal Tool (included with purchase of Jandy lights)
3
4
5
1

Remove Bubbler Lens

1. Turn off the power to the pump. If the pump is located below
the water level, close the isolation valves on the suction and
discharge sides of the pump to prevent backflow of water.
2. Using the lens removal tool, insert the four prongs into the
top of the lens.
NOTE: Lens Removal Tool is needed to complete this installation.
Figure 1. Insert Removal Tool
ENGLISH
Prepare the Bubbler
DESCRIPTION
Snorkel
Eyeball
Metal Sleeve
Lens
2
Jandy TruFit Bubbler Eyeball and Snorkel
TM
®
3
4
5