Download Print this page

Advertisement

Quick Links

Massage bathtub
Notice :only under the surfing function on ,the heating function can be launched ,
and control by the preset temperature .Press (
of temperature will flicker ,then the preset temperature can be changed by pressing
) within 30℃--42℃(default 38℃),When the water temperature
)or(
reach to the preset temperature ,it will turn into constant temperature .
4、Waterfall function :
Press "
"or"
"to
select the waterfall icon ,as
shown to the right :
5、Ozone function (Configuration Options):
Press "
"or"
"to
select the ozone icon ,as shown
to the right :
Notice :the work timing is 15 minutes .
6、Lamp :
Press "
"or"
"to
select the lamp icon ,as shown
to the right :
7、
Drainage function after power off:
Ensure that the main power supply is not cut-off.
the drainage magnetic valve will automaticly startup and shut-off after 30 minutes.
.Items For Attention :
6
1、The system must be erected by qualified technical person and the leakage
switch shall be mounted in place of easy control .
2、 It must be connected firmly during erection .In the case of loss due to improper
earthling ,the manufacturer will not assume any responsibility .
3、The motor must be erected flatly and stably and the shell shall be firmly earthed .
4、The whole set is usually under standby state. If it is not used
please pull off the master power switch.
5、During erection, it is required to consider load capacity of power supply
circuit, otherwise it may influence the normal working of the system or cause
accident.
6、During erection, all the electric appliances and electric parts shall be provided
with moisture resistant measures.
) 2 seconds ,the number
OK
(It will be tur ned off aut om at ical ly ever y 60m inut es .)
OK
To press OK
for ON or OFF
OK
To press OK
for ON or OFF
OK
To press OK
for ON or OFF
after turning off the control panel,
for long time,
Page 7 of 7
User's Guide
IMPORTANT:
Read this manual before proceeding with installation of the bathtub and keep it
with the other accompanying documents.
This manual is valid for the installation of tubs both with and without whirlpool.
MODEL:WP-215
Model:215WP
SIZE:1820X1210X590mm

Advertisement

loading

Summary of Contents for Whirlpool 215WP

  • Page 1 (It will be tur ned off aut om at ical ly ever y 60m inut es .) Read this manual before proceeding with installation of the bathtub and keep it with the other accompanying documents. This manual is valid for the installation of tubs both with and without whirlpool. Press “ ”or“...
  • Page 2 Massage bathtub Massage bathtub 4.Panel description: Install the dia gram Right left connect the power supply Screen Confirm ON/OFF 5.Ope ration: Plane chart Exchange switch 1、ON /OFF :ins er t the pl ug ,pr es s( ) to swi tch on the po wer .Th e scree n wi ll Sprinkler Cold and hot sho w(...
  • Page 3 Massage bathtub Massage bathtub 1.Features(371): 1、 Automatic testing water level by microcomputer. 1、Electricity parameter 2、Surfing function . 3、Bubble bath massage function . Rated voltage Rated power Reference circuit voltage Rated electric current 4、External thermostat function (Configuration Options ) 220VAC 2750W <4A 5、Underwater light .
  • Page 4 Massage bathtub Massage bathtub Bathtub User’s Guide 6. 6 Ch ec k wh et he r ha ve br ea k on pi pe an d wa ter wa y ap er iod ical ly. 6. 7 Pl ea se che ck wh et he r the re is fal l off or br ea kag e on wi re, swi tch, con ne ctor pl ug s so tha t rep ai r in time.