Samsung SVMI-20E Installation Manual page 9

8.2 Procedure Two
From the Main Status Screen (showing activity and port status):
1. Press 'Escape' and enter System Administration password (Default = 0000)
2. Select 'Operating Utilities'
3. Select 'Exit the SVMi-20E'
4. Enter System Administrator's password (Default = 0000)
5. The SDN LED on the front of the SVMi-20E will change from RED to Green. Green means it is safe
to power down the switch.
8.3 Procedure Three
1. From any phone on the system call one of the SVMi-20E ports or call the station group 5039.
2. If the SVMi-20E answers with "please enter your password" press [*] to escape to the main menu.
3. From the main menu press [#][0000]
4. You will be again prompted to enter a password, enter the System Administrator's password
(Default = 0000)
5. You will be prompted with "System Administration Menu" and a list of functions you can perform.
It will not be spoken, but you can enter a hidden option [4] to shut down the system.
6. Again you will be asked to enter a password, enter the System Administrator's password (Default =
0000)
7. The system will now shutdown to a C:> DOS Prompt. The SDN LED will turn from RED to GREEN.
Green means it is safe to power down the switch.
† Also if you are logged in via an SIO Terminal, when the SVMi-20E terminal emulation screen shows a DOS
command line this also means the SVMi-2OE is no longer processing and it is safe to power off the system
and unplug the SVMi-20E card.
9. Connecting Optinal Equipment
There are two ports available on the front of each SVMi-20E, the LAN and the SIO. Both connections are 8 Pin
RJ-45 type connectors.
All the possible peripheral connections will be to one of these ports. The possible connections are:
9.1 Serial Communication (PC Connection)
The serial communication feature allows the installer or the system administrator to connect any com-
munication device that supports ANSI emulation to the SVMi-20E system for the purpose of system
setup and administration.
The serial port can also be used to transfer files to and from the SVMi-20E and an attached PC using the
XMODEN protocols.
SVMi-20E Installation / May 2009
†
†
Home Page
9