Page 1
Thank you for buying smarTrike, If you have any assembly issues or are missing a part, please call us for assistance. Our smarTrike® assembly experts will assist you. DO NOT RETURN TO THE STORE If you are experiencing problems with this product, please call our HELP LINE.
Page 2
Step 1 Parts needed to complete this section Place the washer (M) on the axle (as shown) Connect each back wheel (B) to back axle Pull out plastic tabs from each rear wheel (B2) until the wheel cover(B1) opens. Take out white plugs+ screws (B3).
Page 3
Step 2 Parts needed to complete this section Firmly insert white plug (B3) into axle opening, as shown. Align spring lock with dropout hole in axle and push firmly into position, until piece "clicks" into place. By using the Phillips screwdriver (N), screw part B3 into part B.
Page 4
Step 3 Parts needed to complete this section Insert part D into part Insert part E into part C all the way through the hole (as shown) A all the way through the hole (as shown) the hole (as shown)
Page 5
Step 4 Parts needed to complete this section Push the apple rmly down to ly down to Push the apple firmly down to insert, insert, slightly turn until you insert, slightl slightly turn until you hear a "click". Make " sure white connector is not visible.
Page 6
Step 5 Parts needed to complete this section Take the seat (F), push the screw through the By using the "Allen" key (N), remove seat hole. Screw into the most rear facing screw by turning counter clockwise. hole and firmly tighten with Allen key (N).
Page 7
Step 6 Parts needed to complete this section With little force, push part G into the apple's holes until you hear a "click". Place safety bar (G) holes into protrusions located at the back of the seat.
Page 8
Step 7 Parts needed to complete this section Push basket (H) firmly onto By using the Phillips screwdriver (N), remove screw by turning rear axle until it "clicks" counter clockwise. into position (see 1 & 2). Attach basket firmly to vertical frame (as shown), use removed screw and turn clockwise until secured.
Page 9
Step 8 Parts needed to complete this section Insert part I into part J by pressing the two buttons. Slide until it "clicks" into position.
Page 10
Step 9 Parts needed to complete this section WARNING: Nut must be inserted correctly and secured. Keep the nut in place, remove the screw from part K by turning counter clockwise. Insert part I into part K. Align the hole of part K with the correct hole in part I.
Page 11
Step 10 Parts needed to complete this section WARNING: This product should be used on safe ground, it should not be used near steps, slopes, roadways, public highways or wet areas. Insert the assembled parent Remove the securing pin with handle (K) into the retaining securing lock, as shown.
Page 12
Step 11 Parts needed to complete this section Max. load of basket 2.2 lb / 1 kg. Pull the elastic bands of the bag Attach handles of the bag (L) around the sides of the basket. to parent handle hook. Wrap hook and loop strap around the parent handle.
Page 13
Step 12 For the 10+ month stage, open Pull down both sides of the the footrest by pulling it down. footrest. -13-...
Page 14
Parent Control 10M+ When the clutch is pulled away from the wheel there is no pedal control and the wheel is in a free-wheel position -14-...
Page 15
Child Control Push release button to place it For the 24+ months stage, back into frame (as shown). fold up left and right footrest. -15-...
Need help?
Do you have a question about the Delight and is the answer not in the manual?
Questions and answers